Abstract:Micro-structured surfaces have a significant impact on the flow boiling process in microchannels, but few numerical studies have been carried out due to their complex nature. In this study, the numerical investigation of flow boiling on micro-fin, micro-cavity, and smooth surfaces in a microchannel was conducted, with water serving as the working fluid. The volume-of-fluid (VOF) method, the phase change model, and solid-fluid thermal coupling were adopted in an OpenFOAM solver to perform the computation. The enhancing effects and detailed mechanisms of the micro-fin and micro-cavity surfaces on the heat transfer process are discussed, and the influences of wettability on these surfaces are investigated. With a contact angle of 60°, the heat transfer coefficient of the micro-fin surface was 61.92% larger, and the overall thermal resistance was 36.64% lower than that of a smooth surface, respectively. The confined bubbles on the micro-fin surface had a much smaller dryout area on the heated wall due to the capillary wetting effect. Moreover, the micro-fin surface with the rising nucleate bubbles can induce vortexes, which strengthens the convective heat transfer. As for the micro-cavity surface, it had a moderate heat transfer enhancement with a 17.16% larger heat transfer coefficient and a 13.55% lower thermal resistance when compared with a smooth surface. When the wettability of a heating surface is enhanced, the dryout area is minimized. Thus, the heat transfer performance of the smooth and micro-cavity surfaces is enhanced. The enhancement resulting from modified surface wettability has less of an effect on the micro-fin surface because the micro-fin array serves a similar function to minimize the dryout area.

EXPERIMENTAL AND NUMERICAL INVESTIGATION ON THE HEAT TRANSFER ENHANCEMENT USING LONGITUDINAL VORTICES IN NARROW-CHANNELS

Active Enhancement of Convection Heat Transfer of Air in a Rectangular Channel by Magnetically Induced Longitudinal Vortices

Numerical Simulation of Heat Transfer Enhancement by Jet-Induced Longitudinal Vortices

Field Synergy Optimization and Enhanced Heat Transfer by Multi-Longitudinal Vortexes Flow in Tube

Numerical study of liquid flow and heat transfer in rectangular microchannel with longitudinal vortex generators

Optimization of Flue Gas Convective Heat Transfer with Condensation in a Rectangular Channel

Advances and Outlooks of Heat Transfer Enhancement by Longitudinal Vortex Generators

Heat transfer enhancement mechanism of elliptical cylinder for minichannels with delta winglet longitudinal vortex generators

A numerical study on the flow over a novel tube for heat-transfer enhancement with a linear Eddy-viscosity model

Numerical simulation and optimization on convective heat transfer characteristic in rectangular macro channel by high heat flux

The Convective Heat Transfer For The Extended Surface With Uniform Cross-Section In A Channel

Internal Flow Boiling Heat Transfer Enhanced in Vertical Tubes with Longitudinal Microchannels

Enhancement of Flow Boiling Heat Transfer in Microchannel Using Micro-Fin and Micro-Cavity Surfaces

Experimental and Numerical Analysis on Heat Transfer Performance of Slug Flow in Rectangular Microchannel

Large eddy simulation of free surface turbulent channel flow with heat transfer

Spiral Coil Inserts for Heat Transfer Enhancement in a Parallel-Plate Channel

Simulation of enhancement techniques impact on fluid dynamics and thermal mixing of laminar forced convection flow

A Molecular Dynamics Simulation on the Convective Heat Transfer in Nanochannels

Optimal velocity field for laminar convective heat transfer in rectangular channel

Three-dimensional numerical study on fin-and-oval-tube heat exchanger with longitudinal vortex generators

Investigating Enhanced Convection Heat Transfer in 3D Micro-Ribbed Tubes Using Inverse Problem Techniques