Abstract:The elastic properties of 1D nanostructures such as nanowires are often measured experimentally through actuation of the nanowire at its resonance frequency, and then relating the resonance frequency to the elastic stiffness using elementary beam theory. In the present work, we utilize large scale molecular dynamics simulations to report a novel beat phenomenon in [110] oriented Ag nanowires. The beat phenomenon is found to arise from the asymmetry of the lattice spacing in the orthogonal elementary directions of the [110] nanowire,i.e., [-110] and [001] directions, which results in two different principal moments of inertia. Because of this, actuations imposed along any other direction are found to decompose into two orthogonal vibrational components based on the actuation angle relative to these two elementary directions, with this phenomenon being generalizable to <110> FCC nanowires of different materials (Cu, Au, Ni, Pd and Pt).The beat phenomenon is explained using a discrete moment of inertia model based on the hard sphere assumption, the model is utilized to show that surface effects enhance the beat phenomenon, while the effect is reduced with increasing nanowires cross-sectional size or aspect ratio.Most importantly, due to the existence of the beat phenomena, we demonstrate that in resonance experiments only a single frequency component is expected to be observed, particularly when the damping ratio is relatively large or very small.Furthermore, for a large range of actuation angles, the lower frequency is more likely to be detected than the higher one,which implies the experimental predictions of Young's modulus obtained from resonance may in fact be under predictions. The present study therefore has significant implications for experimental interpretations of Young's modulus as obtained via resonance testing.

Nanowire as pico-gram balance at workplace atmosphere

General Existence of Flexural Mode Doublets in Nanowires Targeting Vectorial Sensing Applications

Optical Nanofiber-Enabled Self-Detection Picobalance

Beat Phenomena in Metal Nanowires, and Their Implications for Resonance-Based Elastic Property Measurements.

Nanowire Thermometers.

A Piezoelectrically Excited ZnO Nanowire Mass Sensor with Closed-Loop Detection at Room Temperature

Single-nanowire Spectrometers

A Zinc Oxide Nanobeam Resonator for Ultrasensitivity Mass Detection

Electrical Actuation and Readout in a Nanoelectromechanical Resonator Based on a Laterally Suspended Zinc Oxide Nanowire

Characterization of Electrical Properties of Suspended ZnO Nanowires Using a Nanorobotic Manipulation System Inside a Scanning Electron Microscope for Nanoelectronic Applications

Nanoparticles: Single Nanoparticle Detection and Sizing Using a Nanofiber Pair in an Aqueous Environment (Adv. Mater. 44/2014)

Highly Uv Luminescent Zno Microtetrapod-On-Nanowire Hybrids

Piezoelectric Characterization of a Single Zinc Oxide Nanowire Using a Nanoelectromechanical Oscillator

ZnO Nanowire and $\hbox{ws}_{2}$ Nanotube Electronics

Silicon Micromachined Resonant Accelerometer Based on ZnO Nanowire

Piezoelectric field effect transistor and nanoforce sensor based on a single ZnO nanowire.

Mechanical/Electrical Characterization of ZnO Nanomaterial Based on AFM/Nanomanipulator Embedded in SEM

In Situ Characterization of the Local Work Function along Individual Free Standing Nanowire by Electrostatic Deflection

In-Situ Study of Surface Work Function, Electrical Characteristic and Field Emission Property of Individual Zno Nanowire

In-Situ Determination of the Flat Band Carrier Concentration and Surface Charge Density of Individual Semiconductor Nanowires by A Combination of Electrical and Field Emission Measurements

Wireless Nanopore Electrodes for Analysis of Single Entities