Abstract:The deformation and load partitioning mechanisms among phases are critical to the detailed understanding of heterogeneous stress distributions at the submicron scale during the process of elastic-plastic transformation in dual-phase (α+β) titanium alloys. Therefore, in this work, a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr titanium alloy was investigated via in-situ high energy X-ray diffraction. We examined the evolution of the lattice strain, peak intensity, and full width at half maximum under uniaxial tensile loading at room temperature. The results indicated that the stress-induced (0002)α→(110)β transformation can be preferentially initiated for lattice strains of 702 × 10−6–1500 × 10−6 and 592 × 10−6–1355 × 10−6 during the elastic loading stage of the {0002}α and {110}β reflections, respectively. In addition, various dog-bone-shaped specimens with interrupted strain amplitudes (0.3%, 3%, 5% and 8.5%) were characterized via transmission electron microscopy. The corresponding selected area electron diffraction pattern confirmed the occurrence of a (0002)α//(110)β Burgers orientation relationship when the alloy was subjected to a strain of ε = 0.3%. Furthermore, the results revealed that the anisotropic non-linear response of specific reflections (i.e., the (0002)α and (110)β reflections) will cause a phase transformation.

Transmission electron microscopy studies of microstructures evolution in Ti2448 single crystals under tensile stress

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

In Situ Transmission Electron Microscopy Study of Alpha-Brass Nanoligament Formation, Microstructure Evolution and Fracture

From Strain Softening to Strain Hardening in Submicron Scale Ti2448 Associated with Slip Mode Transition Mediated by Nanoscale Martensitic Transformation

In Situ Scanning and Transmission Electron Microscopy Investigation on Plastic Deformation in a Metastable Β Titanium Alloy

In-situ Synchrotron X-ray Diffraction Study of Stress-Induced Phase Transformation in Ti50.1Ni40.8Cu9.1 Thin Films

Effect of Tensile Stress on Microstructure Evolution of Al-Cu-Mg-Ag Alloys

Microstructure evolution of Ti-46.5Al-2Nb-2Cr at different strain rates and temperatures

In situ TEM studies of the stress-induced martensitic transformation in nanometric NiTi polycrystal strips

Experimental Evidence of Structural Evolution for TiB2 Microcrystal under Externally High Stresses

Analysis of microstructure evolution during tensile stress induced martensitic transformations

Microstructure and microhardness evolution of Ti-10V-2Fe-3Al alloy under tensile/torsional deformation modes

Microstructure evolution of tial under tensile impact loadings

MOLECULAR DYNAMICS SIMULATIONS OF NANOCRYSTALLINE Ta DURING UNIAXIAL TENSILE DEFORMATION PROCESS

Stress-induced martensitic transformation in a β-solution treated Ti–10V–2Fe–3Al alloy during compressive deformation

Microobservation of Stress Induced Martensitic Transformation in CuAlNi Single Crystals

Stress-induced martensitic transformation cooperative collective effects in superelastic polycrystalline tini shape memory alloys

Transmission electron microscope in-situ observations of twinning in the lamellar microstructure in a TiAl based alloy

EXPERIMENTAL INVESTIGATION ON THE STRESS-INDUCED MARTENSITIC TRANSFORMATION AND THE MICROSTRUCTURE EVOLUTION IN CuAlNi SINGLE CRYSTAL

Phase Transformation Behaviors of TiNi Fibers Embedded in an Aluminum Matrix

Stress-induced Phase Transformation and Phase Boundary Sliding in Ti: an Atomically Resolved In-Situ Analysis