Abstract:The high temperature tensile test of Ti-47.5Al-2.5 V-1.0Cr-0.2Zr alloy was carried out by electronic universal testing machine under the condition of 750–900 °C/10 −5 –10 −3 s −1 . The hot tensile stress-strain curves were analyzed, and the constitutive model under hot tensile conditions was established. The microstructure transformation rule and deformation mechanism during tensile process were determined. The results show that the hot tensile curve is longer in the steady-state flow stage corresponding to lower strain rate and higher tensile temperature, the true stress declines and the elongation at break increases. The constitutive equation was established based on the tensile curve data, and the corresponding thermal activation energy was 310.3 kJ/mol. As the rise of tensile temperature and the decline of strain rate, the proportion about cross-layer fracture in the tensile fracture morphology decreases, the number of dimples increases, more lamellar structures change into recrystallized structures, and the softening effect of the alloy is more obvious. The dislocation deformation mechanism mainly includes the existence of dislocation slip and climb, dislocation intersection and dislocation ring or dislocation network formation. Twinning deformation is also another important mechanism of high temperature tensile deformation of TiAl alloy. Twins are formed in parallel with each other, so that the deformation can be further carried out. The dislocations and twins in the deformed microstructure will provide nucleation conditions for recrystallized grains. The dynamic recrystallization(DRX) grains are preferentially formed around the grain boundary and the vicinity of dislocation and twin is also preferred nucleation site for DRX. The DRX behavior is the main softening mechanism, and DRX size and volume fraction corresponding to lower tensile rate and higher tensile temperature are larger.

Microstructure evolution of tial under tensile impact loadings

Microstructure evolvement of isometry TiAl under tensile impact loadings

Microstructure Evolution of Near Gamma TiAl Intermetallic under Tensile Impact Loadings at High Temperatures

Microstructure evolution of Ti-46.5Al-2Nb-2Cr at different strain rates and temperatures

Effect of Interface Type on Deformation Mechanisms of Γ-Tial Alloy under Different Temperatures and Strain Rates by Molecular Dynamics Simulation

Influence of strain rates on deformation mechanism of duplex TiAl intermetallics

The Microstructures and Deformation Mechanism of Hetero-Structured Pure Ti under High Strain Rates

Characterization and Analysis of Strain Heterogeneity at Grain-Scale of Titanium Alloy with Tri-Modal Microstructure During Tensile Deformation

Tensile Impact Behavior and Deformation Mechanism of Duplex TiAl Intermetallics at Elevated Temperatures

Effects of Strain Rate and Strain on Microstructural Evolution and Mechanical Properties of a Ti-10 At.%al Alloy

Effect of microstructure on tensile properties and fracture behavior of intermetallic Ti2AlNb alloys

Microstructure and microhardness evolution of Ti-10V-2Fe-3Al alloy under tensile/torsional deformation modes

Micro-mechanisms of plastic deformation of two-phase TiAl-base alloy at room temperature

Constitutive Equation and Microstructure Evolution of TiAl Alloy During Hot Deformation

High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy

Dynamic behavior and fracture mode of TiAl intermetallics with different microstructures at elevated temperatures

Study on high temperature tensile constitutive behavior and deformation mechanism of Ti-47.5Al-2.5 V-1.0Cr-0.2Zr alloy

Dynamic Behavior and Microstructural Evolution of TiAl Alloys Tailored Via Phase and Grain Size

Effects of Microstructures on the Deformation and Fracture Behaviors of TiAl-based Alloys

Study on the dynamic deformation behavior and microstructure evolution of Ti-5Al-2.5Sn utilized Quasi-In-Situ method

Study of Deformation Behaviour of TiAl-based Alloy at High Temperature