Abstract:This paper solves this problem by exploiting an incomplete wall waveguide to reduce the height of circulator by 50%. Although these changes always reduce the frequency bandwidth of the element, the proposed technique optimizes the dimensions of the ferrite and its magnetic characteristics, increases the bandwidth to 400 MHz in 2.9 GHz, which is the idea bandwidth required by many radar systems which has been reached. One of the most important components in the radar and microwave industry that provides transmitting and receiving features for an antenna at the same time is called a circulator. Ferrite circulators are passive three‐port devices in which the RF or microwave signal is transmitted from one port to other port without leakage to the third port. One of the main disadvantages of these waveguide elements is their large dimensions and especially their height, which cannot be used in some systems due to the limited workspace. This paper solves this problem by exploiting an incomplete wall waveguide to reduce the height of the circulator by 50%. These changes always reduce the frequency bandwidth of the element, the proposed technique optimizes the dimensions of the ferrite and its magnetic characteristics and increases the bandwidth to 400 MHz in 2.9 GHz, which is the ideal bandwidth required by many radar systems that have been reached. The ferrite circulator designed and built in this article has a port with a width of 72.13 mm and a height of 17 mm in the S‐band. The method results in a low insertion loss which is less than 0.5 decibels and a high isolation which created more than 20 decibels. The designed and optimized elements have been implemented and the test results verify the theoretical results.

Frequency characteristic of fish-bone type microstrip ferrite circulators

Design and simulation of miniaturized microstrip circulator

Design of X band multilayer chip microstrip ferrite circulator

Effect of Magnetization State on the Performance of Self-Biased Microstrip Circulator

Finite Element Simulation of Electromagnetic Properties of Ferrite Material

Design and Simulation on Microstrip Circulator Based on YIG Ferrite Material

Design of microstrip Y-junction circulator based on ferrite thin films

Influence of the Thickness of Ferrite Plate on the Characteristics of Ka-band Microstrip Junction Circulator

Simulation of self-biased coplanar circulator using barium ferrite thin films

Self-Biased Microstrip Junction Circulator Based On Barium Ferrite Thin Films For Monolithic Microwave Integrated Circuits

The design and fabrication of LTCC chip inductors for high frequency applications based on barium ferrites

Design and Simulation of Miniature Ka-band Microstrip Self-Biased Circulator

A Novel Microwave Ferrite Circulator with Flexible Hybrid Structure and Wide Bandwidth

Design and construction of ferrite waveguide circulator with short wall in S band

Design and Fabrication of Self-biased Microstrip Double-Y Junction Circulator

Magnet-Free Miniaturized Circulator Based on Non-Reciprocal Network

Ferrite Coupled-Line Circulator with Reduced Length

Compact Suspension-stripline Circulator for High Power Applications

A Magnetless Filtering Circulator With Enhanced Isolation Bandwidth Using Mixed Static and Time-Modulated Resonators

Design and Simulation of Microstrip Circulator

Phase formation, microstructure and gyromagnetic properties of c-axis oriented M-type hexaferrite applied to self-biased circulator