Abstract:PEO #600 reinforced with nano‐cellulose solid electrolytes. Poly(ethylene oxide) (PEO) with an oxygen group serves as a reactive site for the pathway of lithium‐ion transport. Reducing the PEO crystal domain in solid electrolytes is an extremely efficient approach for enhancing the mobility of ions. The present study applied various EO/Li molar ratios to modify the physical and electrochemical properties of PEO nanocomposite reinforced by nanocellulose. An elevated lithium salt concentration causes a gradual decline in crystallinity and mechanical strength. The electrochemical performance of the 13 EO/Li molar ratio voltammogram and charge–discharge shows efficient Li‐ion transport with 5.6 × 10−4 S/cm conductivity at room temperature and 131 mA h g−1 initial discharge capacity. The shifting glass transition and melting point at lower temperatures (−40.5 to −44.5°C and 45.3–43.8°C) suggest greater ion mobility throughout the large non‐crystalline structure. Lithium ions are limited by membrane weakening and re‐crystallization caused by high lithium salt (EM_11) concentrations. EM_13 has the highest specific capacity, operating voltage, and lithium transfer number depends on balanced electrochemical performance and physical features. XPS surface chemistry analysis explains LiF, Li2CO3, and Li2O solid electrolyte interfaces (SEI) in EM samples. A lower Li2O (11.62 at.%) than LiF (38.4 at.%) after cycling enhances Li‐ion diffusion and cell reversibility.

Effect of nanosized ZnO on the electrical properties of (PEO)16LiClO4 electrolytes

Thermal, mechanical properties and ionic conductivity of (PEO)16LiClO4 electrolytes with different shape ZnO

Thermal, Mechanical Properties and Ionic Conductivity of (PEO)<sub>16</sub>LiClO<sub>4</sub> Electrolytes with Different Shape ZnO

Thermal, Mechanical Properties And Ionic Conductivity Of (Peo)(16)Liclo4 Electrolytes With Different Shape Zno

Study on the Electrical Properties of Peo-Nanosized Zno Composites

Effects of Electrodeposition Electrolyte Concentration on Microstructure, Optical Properties and Wettability of ZnO Nanorods

Preparation and characterization of PEO-PMMA polymer composite electrolytes doped with nano-Al 2 O 3

The Role of Halloy Site on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene-Oxide)/halloysite Nanocomposites

PEO-LiClO4-ZSM5 composite polymer electrolyte: II. Effect of ZSM-5 on ionic conductivity

Nanocomposite Polymer Electrolyte Comprising Peo/Liclo4 and Solid Super Acid: Effect of Sulphated-Zirconia on the Crystallization Kinetics of Peo

Lithiation of ZnO Nanowires Studied by In-Situ Transmission Electron Microscopy and Theoretical Analysis

Thermal, Electrical and Mechanical Properties of (peo)16liclo4 Electrolytes with Modified Montmorillonites

Effect of titanium dioxide and zinc oxide fillers on morphology, electrochemical and mechanical properties of the PEO-based nanofibers, applicable as an electrolyte for lithium-ion batteries

Enhancement of ionic conductivity of PEO based polymer electrolyte by the addition of nanosize ceramic powders

Elucidating the Conductivity Enhancement Effect of Nano-Sized SnO2 Fillers in the Hybrid Polymer Electrolyte PEO–SnO2–LiClO4

Effect of Modified Montmorillonites on the Ionic Conductivity of (peo)16liclo4 Electrolytes

Intermediate Temperature Electrical Properties in 4 Mol% ZnO-doped Zr0.92Y0.08O2-α/NaCl-KCl Composite Electrolyte

Electrochemistry Study on PEO-LiClO4-ZSM5 Composite Polymer Electrolyte

Ionic transport behavior in poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) and LiClO4 complex

LiTFSI salt concentration effect for well‐balanced ion transport and physical properties in nanocellulose‐reinforced PEO#600 solid electrolytes

Influence of TiO2 nano-particles on the transport properties of composite polymer electrolyte for lithium-ion batteries