Abstract:Kaolinite-urea intercalation complex was prepared using kaolinite as intercalation host and urea as intercalating agent. The kaolinite-urea intercalation complex was used as precursor to prepare exfoliated kaolinite by deintercalating urea molecules from the interlayers of kaolinite through ultrasonic treatment. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the as-prepared exfoliated kaolinite. A broad 001 diffraction of kaolinite with weak intensity showed the random orientation of kaolinite platelets. SEM micrograph confirmed the exfoliation of kaolinite particles with layer thickness of no more than 50 nm. The exfoliated kaolinite particles were used as filler to poly(ethylene-oxide)/LiClO4 (PEO/LiClO4) system to prepare PEO/kaolinite composites, with the aim to improve the ion conductivity and mechanical property of the PEO matrix. SEM, transmission electron microscopy (TEM), XRD and Fourier transform infrared spectroscopy (FTIR) were used to characterize the PEO/kaolinite composites. SEM and TEM micrographs exhibited a good dispersion of exfoliated kaolinite in PEO matrix. XRD results showed that the crystallinity of PEO was gradually decreasing with increased exfoliated kaolinite content. FTIR analysis indicated that the hydrogen bonding was formed between the oxygen atoms of PEO segments and the hydroxyl groups on kaolinite surface, and this interaction between PEO and kaolinite was beneficial to the decrease in crystallinity of PEO. In order to evaluate the effect of the exfoliated kaolinite on ion conductivity and mechanical property of PEO matrix, AC impedance measurement and mechanical test were carried out. The results indicated that the ion conductivity of the composites gradually increased with increased exfoliated kaolinite content and reached 6.0 x 10(-5) S/cm at filler concentration of 20 wt%. The formation of amorphous region around the exfoliated kaolinite was beneficial for the Li+ ion conduction in PEO matrix. When the exfoliated kaolinite content reached 10 wt%, the formed amorphous regions were connected to each other to form a network for the transport of Li+ in the interconnected amorphous regions, leading to a sharp increase in ion conductivity. Moreover, the prepared composites under different drying temperature exhibited different ion conductivity. The reason was attributed to the change of PEO crystallinity with drying temperature, and the change trend of the ion conductivity was consistent with that of PEO crystallinity. Under the drying temperature of 95 degrees C, the as-prepared composite possessed high ion conductivity (6.8 x 10(-5) S/cm). In addition, the Young's modulus and tensile strength of the composites were improved because of the introduction of the exfoliated kaolinite into EPO matrix. The composites showed the maximal increase of 256% and 121% in Young's modulus and tensile strength, i.e., to 165.1 MPa and 6.743 MPa respectively, compared to PEO/LiClO4 (46.3 and 3.047 MPa). Therefore, the exfoliated kaolinite was a promising filler to prepare PEO based polymer electrolyte.

Elucidating the Conductivity Enhancement Effect of Nano-Sized SnO2 Fillers in the Hybrid Polymer Electrolyte PEO–SnO2–LiClO4

The Role of Halloy Site on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene-Oxide)/halloysite Nanocomposites

Synergistic Dissociation‐and‐Trapping Effect to Promote Li‐Ion Conduction in Polymer Electrolytes via Oxygen Vacancies

The “filler effect”: A study of solid oxide fillers with β-Li3PS4 for lithium conducting electrolytes

Polyether-grafted SnO2 nanoparticles designed for solid polymer electrolytes with long-term stabilityElectronic supplementary information (ESI) available: XPS results and in situ IR spectra. See http://www.rsc.org/suppdata/jm/b4/b405179c/

Polymer Composite Electrolytes Containing Ionically Active Mesoporous SiO2 Particles

Ionic Conductivity and Cycling Performance in PEO Polymer Electrolyte Enhanced by Non-Milled In Situ Nano-LLZO Powders

Preparation and Characterization of Poly(ethylene-oxide)/Kaolinite Composite Electrolyte

Studies on Composite Polymer Electrolyte Peo/Liclo4/Nano-Sio2

Free volume structure at interphase region of poly (ethylene oxide)-Al2O3 nanorods composites based solid polymer electrolyte and its direct correlation with Li ion conductivity

Nanocomposite solid polymer electrolytes: exploring the impact of GO-graft-P(MA-POSS) nanofiller on structural, dielectric, and electrochemical properties for enhanced lithium-ion conductivity in PEO-based system

Ion-conductive vs. non-ion-conductive ceramic fillers in silane-linked polyethylene oxide-based composite polymer electrolytes with high room-temperature ionic conductivity

Improving Ionic Conductivity with Bimodal-Sized Li7La3Zr2O12 Fillers for Composite Polymer Electrolytes.

Optimizing the Microenvironment in Solid Polymer Electrolytes by Anion Vacancy Coupled with Carbon Dots

Polymer-coated silica dual functional fillers to improve the performance of poly(ethylene oxide)-based solid electrolytes

Electrochemistry Study on PEO-LiClO4-ZSM5 Composite Polymer Electrolyte

PEO-LiClO4-ZSM5 composite polymer electrolyte: II. Effect of ZSM-5 on ionic conductivity

Investigations on the Enhancement Mechanism of Inorganic Filler on Ionic Conductivity of PEO-based Composite Polymer Electrolyte: the Case of Molecular Sieves

High Ionic Conductivity of Composite Solid Polymer Electrolyte Via in Situ Synthesis of Monodispersed SiO2 Nanospheres in Poly(ethylene Oxide).

Role of Filler Content and Morphology in LLZO/PEO Membranes

Influences of phase structure on room temperature conductivity of polyethylene oxide/succinonitrile/lithium perchlorate composite electrolytes