Abstract:Exploring high performance solid electrolytes is essential for the practical application of solid-state lithium–metal batteries. Here, graphene oxide (GO) is employed to improve the electrochemical performance, thermal stability, and mechanical strength of the poly(ethylene oxide) (PEO) based electrolyte. The ionic conductivity of the hybrid electrolyte containing 1 wt % GO reaches 1.54 × 10–5 S cm–1 at 24 °C, which is 7 times that of the electrolyte without GO, and the activation energy decreases from 1.01 to 0.64 eV. It is found that GO can suppress the formation of crystalline nuclei of PEO, thus increase the amorphous regions, and improve the movement ability of the PEO segments. Importantly, GO-modified PEO electrolyte not only has a wide electrochemical window (∼5 V) but also increases the lithium ion migration number to 0.42. Taking advantage of the decent GO–PEO solid electrolyte, the symmetric Li/Li cell can stably cycle for 600 h with a very small overpotential (27 mV) at 0.1 mA cm–2, showing excellent performance in inhibiting lithium dendrites. Most importantly, the LiFePO4//GO–PEO//Li full battery also delivers superior cycle and rate properties, with an initial discharge capacity of 142 mAh g–1 at 0.5 C and 91% capacity retention after 100 cycles. Moreover, the full battery can stably cycle for more than 450 charge–discharge cycles at 1 C. It is anticipated that PEO polymer electrolyte modified by GO has great practical application potential.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00090?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00090</a>.Characterization of specific surface area of GO nanosheets; mechanical tensile properties of electrolyte at room temperature; impedance diagram of GO–PEO electrolyte at different temperatures; optical photograph of thermal stability of electrolyte; mechanical tensile properties of electrolyte at 60 °C; lithium ion migration number of PEO–LiTFSI electrolyte; lithium symmetrical battery cycling of PEO–LiTFSI electrolyte; SEM image of electrolyte after lithium symmetrical cycling test; charge–discharge curves of PEO–LiTFSI electrolyte; SEM image of PEO–LiTFSI full battery after cyclic charge and discharge test; thermal performance parameter table of polymer electrolyte; comparison table of main parameters of hybrid polymer solid electrolyte in this work and previous mainstream work (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00090/suppl_file/ae1c00090_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Nanocomposite solid polymer electrolytes: exploring the impact of GO-graft-P(MA-POSS) nanofiller on structural, dielectric, and electrochemical properties for enhanced lithium-ion conductivity in PEO-based system

Nanocomposite Solid Polymer Electrolytes with Polymer Blend (PVDF‐HFP/Pluronic) as Matrix and GO as Nanofiller: Preparation, Structural Characterization, and Lithium‐Ion Conductivity Analysis

Performance Enhancement of PEO: LiDFOB Based Nanocomposite Solid Polymer Electrolytes via Incorporation of POSS-PEG 13.3 Hybrid Nanoparticles for Solid-State Li-ion Batteries

The polymer composite electrolyte with polyethylene oxide-grafted graphene oxide as fillers toward stable highcurrent density lithium metal anodes

Highly efficient polymer electrolyte based on electrospun PEO/PAN/single-layered graphene oxide

Graphene oxide as a filler to improve the performance of PAN-LiClO4 flexible solid polymer electrolyte

Intimate interaction of TFSI− anions with MoO3−x oxygen vacancies boost ionic conductivity of cathode-supported solid polymer electrolyte

g-C3N4 nanosheets enhanced solid polymer electrolytes with excellent electrochemical performance, mechanical properties, and thermal stability

Protonated chitosan nanostructures for enhancing ionic conductivity of solid-state electrolytes

Enhancing Li-ion conduction and mechanical properties via addition of fluorine-containing metal—organic frameworks in all-solid-state cross-linked hyperbranched polymer electrolytes

Free volume structure at interphase region of poly (ethylene oxide)-Al2O3 nanorods composites based solid polymer electrolyte and its direct correlation with Li ion conductivity

Polymer-coated silica dual functional fillers to improve the performance of poly(ethylene oxide)-based solid electrolytes

Synergistic Combination of Ether-Linkage and Polymer-in-Salt for Electrolytes with Facile Li + Conducting and High Stability in Solid-State Lithium Batteries

Studies on Composite Polymer Electrolyte Peo/Liclo4/Nano-Sio2

Graphene Oxide Enabled Flexible PEO-Based Solid Polymer Electrolyte for All-Solid-State Lithium Metal Battery

Ion-conductive vs. non-ion-conductive ceramic fillers in silane-linked polyethylene oxide-based composite polymer electrolytes with high room-temperature ionic conductivity

Elucidating the Conductivity Enhancement Effect of Nano-Sized SnO2 Fillers in the Hybrid Polymer Electrolyte PEO–SnO2–LiClO4

Preparation of Nanocomposite Polymer Electrolyte via In Situ Synthesis of SiO2 Nanoparticles in PEO

Enhanced Electrochemical Performance of PEO-Based Composite Polymer Electrolyte with Single-Ion Conducting Polymer Grafted SiO2 Nanoparticles

(Invited) Advancing Understanding of Composite Polymer Electrolytes with LLZO Nanofibers

Novel PEO-based composite solid electrolytes for all-solid-state Li-S battery