Abstract:Porphyrins and their derivatives are a unique class of multifunctional and modifiable π-conjugated heterocyclic organic molecules, which have been widely applied in the fields of optoelectronic devices and catalysis. However, the application of porphyrins in polymer electrolytes for all-solid-state lithium-ion batteries (ASSLIBs) has rarely been reported. Herein, porphyrin molecules modified by polyether chains are used for composite solid-state polymer electrolytes (CSPEs) for the first time. The introduction of a modified porphyrin in an electrolyte can not only promote the electrochemical properties by constructing ordered ion channels via the intermolecular interaction between π-conjugated heterocyclic porphyrins, but also significantly improve the mechanical strength and interface contact between the electrolyte membrane and the lithium metal anode. Consequently, the all-solid-state batteries assembled by the modified porphyrin composite polymer electrolyte, LiFePO4 cathodes, and Li anodes deliver a higher discharge capacity of 158.2 mA h g–1 at 60 °C, 0.2 C, which remains at 153.6 mA h g–1 after 120 cycles with an average coulombic efficiency of ∼99.60%. Furthermore, the flexible porphyrin-based composite polymer electrolyte can also enable a Li || LiCoO2 battery to exhibit a maximum discharge capacity of 108.6 mA h g–1 at 60 °C, 0.1 C with an active material loading of 2–3 mg cm–2, which is unable to realize for the corresponding batteries with a pure PEO-based polymer electrolyte. This work not only broadens the application scope of porphyrins, but also proposes a novel method to fabricate CSPEs with improved electrochemical and mechanical properties, which may shed new light on the development of CSPEs for next-generation high-energy-density lithium-ion batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c12086.Additional experimental details including materials, monomer synthesis, characterizations and electrochemical measurements; 1H NMR and UV–vis spectra of the obtained monomers; photographs of the obtained electrolytes; characterizations of the as-prepared CSPE; FTIR, 1H NMR, and XPS spectra of PEO SPE and CSPE; additional cell performances; SEM images of the cycled Li foils; analysis of the SEI of the corresponding batteries; pouch-type cell testing; thermal behavior of pure PEO, PEO-35wt% Li SPE, and CSPE-20wt% HP-35wt% Li; related parameters and the lithium-ion transference number; element ratios of C, F, O, and S; and cell performance of several lithium-metal batteries using PEO-based composite electrolytes with different functional fillers (PDF)All-solid-state pouch cell regaining its original shape and the LED remaining lit (MP4)Pouch-type cell lighting up the LED lamp after being penetrated with a nail (MP4)This article has not yet been cited by other publications.

Protonated chitosan nanostructures for enhancing ionic conductivity of solid-state electrolytes

Polymer-coated silica dual functional fillers to improve the performance of poly(ethylene oxide)-based solid electrolytes

Simultaneous Improvement of Ionic Conductivity and Mechanical Strength in Block Copolymer Electrolytes with Double Conductive Nanophases.

High Ionic Conductivity of Composite Solid Polymer Electrolyte Via in Situ Synthesis of Monodispersed SiO2 Nanospheres in Poly(ethylene Oxide).

Building Up Ion-Conduction Pathways in Solid Polymer Electrolytes Through Surface and Pore Functionalization of PVDF Porous Membranes with Ionic Conductors

Carboxymethyl chitosan composited poly(ethylene oxide) electrolyte with high ion conductivity and interfacial stability for lithium metal batteries

Novel PEO-based composite solid electrolytes for all-solid-state Li-S battery

Synergistic Combination of Ether-Linkage and Polymer-in-Salt for Electrolytes with Facile Li + Conducting and High Stability in Solid-State Lithium Batteries

Cationic cellulose nanofiber solid electrolytes: A pathway to high lithium-ion migration and polysulfide adsorption for lithium-sulfur batteries

Effect of Organic Functional Groups on Poly(ethylene Oxide) Electrolytes for High-Performance Solid-State Lithium-Metal Batteries

g-C3N4 nanosheets enhanced solid polymer electrolytes with excellent electrochemical performance, mechanical properties, and thermal stability

Tailoring Li+ Local Coordination Environment of Solid Polymer Electrolytes to Boom Ionic Conductivity

Enhancing Li-ion conduction and mechanical properties via addition of fluorine-containing metal—organic frameworks in all-solid-state cross-linked hyperbranched polymer electrolytes

Polymer Composite Electrolytes Containing Ionically Active Mesoporous SiO2 Particles

In-situ generated solid-state electrolytes with intimate interface affinity enable conductivity and high performances for lithium–ion batteries

Nano-silica doped composite polymer chitosan/poly(ethylene oxide)-based electrolyte with high electrochemical stability suitable for quasi solid-state lithium metal batteries

Enhanced Electrochemical Performance of PEO-Based Composite Polymer Electrolyte with Single-Ion Conducting Polymer Grafted SiO2 Nanoparticles

One-Pot Synthesis of Quaternary Pyridinium-Type Cationic-Based Porous Organic Frameworks: Enhanced Poly(ethylene oxide) Composite Polymer Electrolytes for All-Solid-State Li–S Batteries

Application of a Modified Porphyrin in a Polymer Electrolyte with Superior Properties for All-Solid-State Lithium Batteries

Conducting Composite Polymer‐Based Solid‐State Electrolyte with High Ion Conductivity via Amorphous Condensed Structure and Multiple Li+ Transport Channels

Phenylboronic Acid Functionalized Calix[4]pyrrole‐based Solid‐State Supramolecular Electrolyte