Abstract:Exploring high performance solid electrolytes is essential for the practical application of solid-state lithium–metal batteries. Here, graphene oxide (GO) is employed to improve the electrochemical performance, thermal stability, and mechanical strength of the poly(ethylene oxide) (PEO) based electrolyte. The ionic conductivity of the hybrid electrolyte containing 1 wt % GO reaches 1.54 × 10–5 S cm–1 at 24 °C, which is 7 times that of the electrolyte without GO, and the activation energy decreases from 1.01 to 0.64 eV. It is found that GO can suppress the formation of crystalline nuclei of PEO, thus increase the amorphous regions, and improve the movement ability of the PEO segments. Importantly, GO-modified PEO electrolyte not only has a wide electrochemical window (∼5 V) but also increases the lithium ion migration number to 0.42. Taking advantage of the decent GO–PEO solid electrolyte, the symmetric Li/Li cell can stably cycle for 600 h with a very small overpotential (27 mV) at 0.1 mA cm–2, showing excellent performance in inhibiting lithium dendrites. Most importantly, the LiFePO4//GO–PEO//Li full battery also delivers superior cycle and rate properties, with an initial discharge capacity of 142 mAh g–1 at 0.5 C and 91% capacity retention after 100 cycles. Moreover, the full battery can stably cycle for more than 450 charge–discharge cycles at 1 C. It is anticipated that PEO polymer electrolyte modified by GO has great practical application potential.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00090?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00090</a>.Characterization of specific surface area of GO nanosheets; mechanical tensile properties of electrolyte at room temperature; impedance diagram of GO–PEO electrolyte at different temperatures; optical photograph of thermal stability of electrolyte; mechanical tensile properties of electrolyte at 60 °C; lithium ion migration number of PEO–LiTFSI electrolyte; lithium symmetrical battery cycling of PEO–LiTFSI electrolyte; SEM image of electrolyte after lithium symmetrical cycling test; charge–discharge curves of PEO–LiTFSI electrolyte; SEM image of PEO–LiTFSI full battery after cyclic charge and discharge test; thermal performance parameter table of polymer electrolyte; comparison table of main parameters of hybrid polymer solid electrolyte in this work and previous mainstream work (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00090/suppl_file/ae1c00090_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Graphene oxide as a filler to improve the performance of PAN-LiClO4 flexible solid polymer electrolyte

The polymer composite electrolyte with polyethylene oxide-grafted graphene oxide as fillers toward stable highcurrent density lithium metal anodes

Graphene Oxide Enabled Flexible PEO-Based Solid Polymer Electrolyte for All-Solid-State Lithium Metal Battery

Single-ion conductors functionalized graphene oxide enabling solid polymer electrolytes with uniform Li-ion transport toward stable and dendrite-free lithium metal batteries

Nanocomposite solid polymer electrolytes: exploring the impact of GO-graft-P(MA-POSS) nanofiller on structural, dielectric, and electrochemical properties for enhanced lithium-ion conductivity in PEO-based system

Using Pegylated Graphene Oxide to Achieve High Performance Solid Polymer Electrolyte Based on Poly(ethylene oxide)/Polyvinyl Alcohol Blend (PEO/PVA)

g-C3N4 nanosheets enhanced solid polymer electrolytes with excellent electrochemical performance, mechanical properties, and thermal stability

Polymer-coated silica dual functional fillers to improve the performance of poly(ethylene oxide)-based solid electrolytes

Nanocomposite Solid Polymer Electrolytes with Polymer Blend (PVDF‐HFP/Pluronic) as Matrix and GO as Nanofiller: Preparation, Structural Characterization, and Lithium‐Ion Conductivity Analysis

Enhancing Li-ion conduction and mechanical properties via addition of fluorine-containing metal—organic frameworks in all-solid-state cross-linked hyperbranched polymer electrolytes

Enhancement of the Electrochemical Performances of Composite Solid-State Electrolytes by Doping with Graphene

Intimate interaction of TFSI− anions with MoO3−x oxygen vacancies boost ionic conductivity of cathode-supported solid polymer electrolyte

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

Flexible Composite Solid Electrolyte with an Active Inorganic Filler

Composite polymer electrolytes with uniform distribution of ionic liquid-grafted ZIF-90 nanofillers for high-performance solid-state Li batteries

Two‐Dimensional Fluorinated Graphene Reinforced Solid Polymer Electrolytes for High‐Performance Solid‐State Lithium Batteries

Porous garnet as filler of solid polymer electrolytes to enhance the performance of solid-state lithium batteries

High-performance Solid Polymer Electrolytes for Lithium Ion Batteries Based on Sulfobetaine Zwitterion and Poly (ethylene Oxide) Modified Polysiloxane

PAN–PEO Solid Polymer Electrolytes with High Ionic Conductivity

Preparation of gel polymer electrolyte with high lithium ion transference number using GO as filler and application in lithium battery

High-Performance Poly(vinylidene fluoride)-Based Composite Polymer Electrolytes for Lithium Batteries Based on Halloysite Nanotubes with Polyethylene Oxide Additives