Abstract:Exploring high performance solid electrolytes is essential for the practical application of solid-state lithium–metal batteries. Here, graphene oxide (GO) is employed to improve the electrochemical performance, thermal stability, and mechanical strength of the poly(ethylene oxide) (PEO) based electrolyte. The ionic conductivity of the hybrid electrolyte containing 1 wt % GO reaches 1.54 × 10–5 S cm–1 at 24 °C, which is 7 times that of the electrolyte without GO, and the activation energy decreases from 1.01 to 0.64 eV. It is found that GO can suppress the formation of crystalline nuclei of PEO, thus increase the amorphous regions, and improve the movement ability of the PEO segments. Importantly, GO-modified PEO electrolyte not only has a wide electrochemical window (∼5 V) but also increases the lithium ion migration number to 0.42. Taking advantage of the decent GO–PEO solid electrolyte, the symmetric Li/Li cell can stably cycle for 600 h with a very small overpotential (27 mV) at 0.1 mA cm–2, showing excellent performance in inhibiting lithium dendrites. Most importantly, the LiFePO4//GO–PEO//Li full battery also delivers superior cycle and rate properties, with an initial discharge capacity of 142 mAh g–1 at 0.5 C and 91% capacity retention after 100 cycles. Moreover, the full battery can stably cycle for more than 450 charge–discharge cycles at 1 C. It is anticipated that PEO polymer electrolyte modified by GO has great practical application potential.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00090?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00090</a>.Characterization of specific surface area of GO nanosheets; mechanical tensile properties of electrolyte at room temperature; impedance diagram of GO–PEO electrolyte at different temperatures; optical photograph of thermal stability of electrolyte; mechanical tensile properties of electrolyte at 60 °C; lithium ion migration number of PEO–LiTFSI electrolyte; lithium symmetrical battery cycling of PEO–LiTFSI electrolyte; SEM image of electrolyte after lithium symmetrical cycling test; charge–discharge curves of PEO–LiTFSI electrolyte; SEM image of PEO–LiTFSI full battery after cyclic charge and discharge test; thermal performance parameter table of polymer electrolyte; comparison table of main parameters of hybrid polymer solid electrolyte in this work and previous mainstream work (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00090/suppl_file/ae1c00090_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhancement of the Electrochemical Performances of Composite Solid-State Electrolytes by Doping with Graphene

Fluorinated boron nitride nanosheet enhanced ultrathin and conductive polymer electrolyte for high‐rate solid‐state lithium metal batteries

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

In Situ Construction of Ether-Based Composite Electrolyte with Stable Electrode Interphase for High-Performance Solid State Lithium Metal Battery

Composite Solid Electrolyte for Solid-State Lithium Batteries Workable at Room Temperature

Two‐Dimensional Fluorinated Graphene Reinforced Solid Polymer Electrolytes for High‐Performance Solid‐State Lithium Batteries

Interfacial Interaction of Multifunctional GQDs Reinforcing Polymer Electrolytes For All‐Solid‐State Li Battery

An agglomeration-free and high ion conductive ceramic-in-polymer composite solid electrolyte modified by fluorocarbon surfactant for enhancing performance of all-solid-state lithium batteries

Composite Electrolyte with Self‐inserted Structure and All‐trans F Conformation Provides Fast Li+ Transport for Solid‐state Li Metal Batteries

Preparation and Study of Poly(Vinylidene Fluoride-Co-Hexafluoropropylene)-Based Composite Solid Electrolytes

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

Facile Interfacial Modification Via In-Situ Ultraviolet Solidified Gel Polymer Electrolyte for High-Performance Solid-State Lithium Ion Batteries

Composite Electrolytes of Pyrrolidone-Derivatives-peo Enable to Enhance Performance of All Solid State Lithium-Ion Batteries

Incorporating lithium magnesium silicate into PVDF-HFP based solid electrolyte to achieve advanced solid-state lithium-ion batteries

The polymer composite electrolyte with polyethylene oxide-grafted graphene oxide as fillers toward stable highcurrent density lithium metal anodes

Construction of flexible asymmetric composite polymer electrolytes for high-voltage lithium metal batteries with superior performance

Transparent PVDF-based electrolyte enabled by lipophilic lithium magnesium silicate for solid-state lithium batteries

A composite PEO electrolyte with amide-based polymer matrix for suppressing lithium dendrite growth in all-solid-state lithium battery

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

Highly Efficient Interface Modification between Poly(Propylene Carbonate)-Based Solid Electrolytes and a Lithium Anode by Facile Graphite Coating

Graphene Oxide Enabled Flexible PEO-Based Solid Polymer Electrolyte for All-Solid-State Lithium Metal Battery