Abstract:Solid electrolytes have gained attention recently for the development of next-generation Li-ion batteries since they can fundamentally improve the battery stability and safety. Among various types of solid electrolytes, composite solid electrolytes (CSEs) exhibit both high ionic conductivity and excellent interfacial contact with the electrodes. Incorporating active nanofibers into the polymer matrix demonstrates an effective method to fabricate CSEs. However, current CSEs based on traditional poly(ethylene oxide) (PEO) polymer suffer from the poor ionic conductivity of PEO and agglomeration effect of inorganic fillers at high concentrations, which limit further improvements in Li+ conductivity and electrochemical stability. Herein, we synthesize a novel PEO based cross-linked polymer (CLP) as the polymer matrix with naturally amorphous structure and high room-temperature ionic conductivity of 2.40 × 10−4 S cm−1. Li0.3La0.557TiO3 (LLTO) nanofibers are incorporated into the CLP matrix to form composite solid electrolytes, achieving enhanced ionic conductivity without showing filler agglomeration. The high content of Li-conductive nanofibers improves the mechanical strength, ensures the conductive network, and increases the total Li+ conductivity to 3.31 × 10−4 S cm−1. The all-solid-state Li|LiFePO4 batteries with LLTO nanofiber-incorporated CSEs are able to deliver attractive specific capacity of 147 mAh g−1 at room temperature, and no evident dendrite is found at the anode/electrolyte interface after 100 cycles.Graphic AbstractA highly ionic-conductive 3-D fiber network composite solid electrolyte is introduced based on Li-ion conducting nanofibers and amorphous poly(ethylene oxide) (PEO) cross-linked polymer. With the reinforcement of Li0.3La0.557TiO3 (LLTO) nanofibers, the continuous 3D conduction network formed within the polymer matrix greatly enhances the electrochemical and mechanical properties of resultant composite solid electrolytes. Consequently, the lithium dendrite is effectively controlled after long cycles, and the all-solid-state Li|LiFePO4 prototype cells demonstrate excellent cycling stability at room temperature.

An agglomeration-free and high ion conductive ceramic-in-polymer composite solid electrolyte modified by fluorocarbon surfactant for enhancing performance of all-solid-state lithium batteries

Li6.4La3Zr1.4Ta0.6O12/Star-Shaped Hybrid Polyhedral Oligomeric Cage Silsesquioxane Polymer Composite Electrolytes for All-Solid-State Lithium Metal Batteries

Poly(ethylene Oxide)/poly(vinylidene FLuoride)/li6.4la3zr1.4ta0.6o12 Composite Electrolyte with a Stable Interface for High Performance Solid State Lithium Metal Batteries

In Situ Construction of Ether-Based Composite Electrolyte with Stable Electrode Interphase for High-Performance Solid State Lithium Metal Battery

Polyvinylidene fluoride nanofibers with embedded Li6.4La3Zr1.4Ta0.6O12 fillers modified polymer electrolytes for high-capacity and long-life all-solid-state lithium metal batteries

Hybridizing poly(vinylidene fluoride-co-hexafluoropropylene) with Li6.5La3Zr1.5Ta0.5O12 as a lithium-ion electrolyte for solid state lithium metal batteries

Flexible Poly(ethylene Carbonate)/garnet Composite Solid Electrolyte Reinforced by Poly(vinylidene Fluoride-Hexafluoropropylene) for Lithium Metal Batteries

Preparation and Electrochemical Performance of Li6.4La3Zr1.4Ta0.6O12/Polymer-Based Solid Composite Electrolyte

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

High-Performance Solid Composite Polymer Electrolyte for all Solid-State Lithium Battery Through Facile Microstructure Regulation

Composite Polymer Electrolyte with Vertically Aligned Garnet Scaffolds for Quasi Solid-State Lithium Batteries

Garnet/polymer solid electrolytes for high-performance solid-state lithium metal batteries: The role of amorphous Li2O2

Electrochemical Performance of All-Solid-state Lithium Batteries Using Inorganic Lithium Garnets Particulate Reinforced PEO/LiClO4 Electrolyte

Building a Highly Functional Li1.3Al0.3Ti1.7(PO4)3/poly (vinylidene Fluoride) Composite Electrolyte for All-Solid-state Lithium Batteries

Achieving stable interface for lithium metal batteries using fluoroethylene carbonate-modified garnet-type Li6.4La3Zr1.4Ta0.6O12 composite electrolyte

A promising composite solid electrolyte incorporating LLZO into PEO/PVDF matrix for all-solid-state lithium-ion batteries

Rapid Ion Transport Induced by the Enhanced Interaction in Composite Polymer Electrolyte for All-Solid-State Lithium-Metal Batteries

Interfacial Engineering Facilitating Robust Li6.35ga0.15la3zr1.8nb0.2o12 For All-Solid-State Lithium Batteries

PEO/garnet Composite Electrolytes for Solid-State Lithium Batteries: from “Ceramic-in-polymer” to “Polymer-in-ceramic”

Strippable and flexible solid electrolyte membrane by coupling Li6.4La3Zr1.4Ta0.6O12 and insulating polyvinylidene fluoride for solid state lithium ion battery

High-Performance 3-D Fiber Network Composite Electrolyte Enabled with Li-Ion Conducting Nanofibers and Amorphous PEO-Based Cross-Linked Polymer for Ambient All-Solid-State Lithium-Metal Batteries