Abstract:In this study, we used a solution-casting technique to prepare all-solid-state composite polymer electrolytes (CPEs) based on poly(vinyl alcohol)/polyacrylonitrile blends, the ceramic filler Li14Al04Ti16(PO4)3 (LATP, NASICON-type structure), lithium bis(trifluoromethanesulfonyl)imide, and the solid plasticizer succinonitrile (SN) and then investigated their electrochemical stability, ionic transport properties, and interfacial behavior against lithium electrodes The CPEs prepared with optimal concentrations of LATP (20 wt %) and SN (10 wt %) exhibited a maximum ionic conductivity of 1.13 × 10–4 S cm–1 at 25 °C, a Li+-ion transference number of 0.507, and an electrochemical stability window of 5.1 V (vs Li/Li+). This CPE was a free-standing membrane and highly flexible. An all-solid-state Li//LiFePO4 battery assembled with this CPE displayed excellent cycling stability and rate performance at room temperature. A maximum discharge capacity of 159.6 mA h g–1 was achieved at 0.1C. The full cell achieved a discharge capacity of 119.4 mA h g–1 at 0.5C and a capacity retention of 90.5% after 100 cycles at ambient temperature. Therefore, this as-prepared CPE shows great promise for use in all-solid-state lithium-metal batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c02018?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c02018</a>.SEM images of commercial 50050 LFP, particle size distribution and XRD spectrum of LFP, the SEM image of LATP, the EDX spectrum of the LATP powder, heating experiments, the flammability test, stress–strain curves, the i–t curve, AC spectra, the EIS Nyquist plot of the symmetric cell, SEM images of the lithium anode before and after cycling, and AC impedance of the battery (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c02018/suppl_file/ae0c02018_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Composite Solid Electrolyte for Solid-State Lithium Batteries Workable at Room Temperature

High-Performance Poly(vinylidene fluoride-hexafluoropropylene)-Based Composite Electrolytes with Excellent Interfacial Compatibility for Room-Temperature All-Solid-State Lithium Metal Batteries

High-performance intercalated composite solid electrolytes for lithium metal battery

Synergistic Effect of Lithium Salts with Fillers and Solvents in Composite Electrolytes for Superior Room-Temperature Solid-State Lithium Batteries

Lithium Superionic Conductive Nanofiber-Reinforcing High-Performance Polymer Electrolytes for Solid-State Batteries.

Solution-processed poly(vinylidene difluoride)/cellulose acetate/Li1+xAlxTi2-x(PO4)3 composite solid electrolyte for improving electrochemical performance of solid-state lithium-ion batteries at room temperature

Unleashing the Potential of Li-Metal Batteries A Breakthrough Ultra-High Room-Temperature Ionic Conductivity Composite Solid-State Electrolyte

Al2O3 Fiber-Reinforced Polymer Solid Electrolyte Films with Excellent Lithium-Ion Transport Properties for High-Voltage Solid- State Lithium Batteries

3Li2S-2MoS2 filled composite polymer PVDF-HFP/LiODFB electrolyte with excellent interface performance for lithium metal batteries

In-situ Curing Poly(n,n'-Methylenebisacrylamide)-based Composite Electrolyte Reinforced with High-Strength Glass Fiber Skeleton for Solid State Lithium Ion Batteries

Flexible PVDF-HFP based hybrid composite solid electrolyte membrane co-filled with hydroxypropyl methyl cellulose and Li6.4La3Zr1.4Ta0.6O12 for high-performance solid-state lithium batteries

Composite Polymer Electrolytes Based on PVA/PAN for All-Solid-State Lithium Metal Batteries Operated at Room Temperature

Single‐Ion Conductive Polymer‐Based Composite Electrolytes for High‐Performance Solid‐State Lithium Metal Batteries

Excellent Performances of Composite Polymer Electrolytes with Porous Vinyl-Functionalized SiO<sub>2</sub> Nanoparticles for Lithium Metal Batteries

High-Performance Solid Composite Polymer Electrolyte for all Solid-State Lithium Battery Through Facile Microstructure Regulation

Composite polymer electrolyte based on poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for solid-state batteries

Composite Solid-State Electrolyte with Vertical Ion Transport Channels for All-Solid-State Lithium Metal Batteries

Li6.25Al0.25La3Zr1.75Nb 0.25O12 Nanofiber Fillers Reinforced PVDF-HFP-Based Bilayer Composite Solid-State Electrolytes

3D nanofiber framework based on polyacrylonitrile and siloxane-modified Li6.4La3Zr1.4Ta0.6O12 reinforced poly (ethylene oxide)-based composite solid electrolyte for lithium batteries

Dual-layer Composite Solid Polymer Electrolytes with Janus Properties for Interface Modification of Solid State Lithium Metal Batteries

Composite polymer electrolyte facilitated by enhanced amorphousity and Li+ conduction using LaFeO3-embedded PVDF-HFP for solid-state lithium metal battery