Abstract:In this study, we used a solution-casting technique to prepare all-solid-state composite polymer electrolytes (CPEs) based on poly(vinyl alcohol)/polyacrylonitrile blends, the ceramic filler Li14Al04Ti16(PO4)3 (LATP, NASICON-type structure), lithium bis(trifluoromethanesulfonyl)imide, and the solid plasticizer succinonitrile (SN) and then investigated their electrochemical stability, ionic transport properties, and interfacial behavior against lithium electrodes The CPEs prepared with optimal concentrations of LATP (20 wt %) and SN (10 wt %) exhibited a maximum ionic conductivity of 1.13 × 10–4 S cm–1 at 25 °C, a Li+-ion transference number of 0.507, and an electrochemical stability window of 5.1 V (vs Li/Li+). This CPE was a free-standing membrane and highly flexible. An all-solid-state Li//LiFePO4 battery assembled with this CPE displayed excellent cycling stability and rate performance at room temperature. A maximum discharge capacity of 159.6 mA h g–1 was achieved at 0.1C. The full cell achieved a discharge capacity of 119.4 mA h g–1 at 0.5C and a capacity retention of 90.5% after 100 cycles at ambient temperature. Therefore, this as-prepared CPE shows great promise for use in all-solid-state lithium-metal batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c02018?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c02018</a>.SEM images of commercial 50050 LFP, particle size distribution and XRD spectrum of LFP, the SEM image of LATP, the EDX spectrum of the LATP powder, heating experiments, the flammability test, stress–strain curves, the i–t curve, AC spectra, the EIS Nyquist plot of the symmetric cell, SEM images of the lithium anode before and after cycling, and AC impedance of the battery (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c02018/suppl_file/ae0c02018_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Solution-processed poly(vinylidene difluoride)/cellulose acetate/Li1+xAlxTi2-x(PO4)3 composite solid electrolyte for improving electrochemical performance of solid-state lithium-ion batteries at room temperature

Synergistic Effect of Lithium Salts with Fillers and Solvents in Composite Electrolytes for Superior Room-Temperature Solid-State Lithium Batteries

Composite Solid Electrolyte for Solid-State Lithium Batteries Workable at Room Temperature

High-Performance Poly(vinylidene fluoride-hexafluoropropylene)-Based Composite Electrolytes with Excellent Interfacial Compatibility for Room-Temperature All-Solid-State Lithium Metal Batteries

Organic-Inorganic Composite Electrolytes Optimized with Fluoroethylene Carbonate Additive for Quasi-Solid-State Lithium-Metal Batteries.

Fluorinated boron nitride nanosheet enhanced ultrathin and conductive polymer electrolyte for high‐rate solid‐state lithium metal batteries

A promising composite room temperature solid electrolyte via incorporating LLZTO into cross-linked ETPTA/PEO/SN matrix for all solid state lithium batteries

Composite polymer electrolyte based on poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for solid-state batteries

Composite Polymer Electrolytes Based on PVA/PAN for All-Solid-State Lithium Metal Batteries Operated at Room Temperature

Li1.5Al0.5Ti1.5(PO4)3 enhanced polyethylene oxide polymer electrolyte for all-solid-state lithium batteries

High-performance intercalated composite solid electrolytes for lithium metal battery

Sodium Super Ionic Conductor-Type Hybrid Electrolytes for High Performance Lithium Metal Batteries

Composite Solid-State Electrolyte with Vertical Ion Transport Channels for All-Solid-State Lithium Metal Batteries

A newly designed composite gel polymer electrolyte based on poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for enhanced solid-state lithium-sulfur batteries.

Enabling a scalable composite solid electrolyte via cathode-supported scale-up processing

Flexible Organic–Inorganic Composite Solid Electrolyte with Asymmetric Structure for Room Temperature Solid-State Li-Ion Batteries

poly(vinylidene fluoride)-based dual-salt composite polymer electrolytes for superior room-temperature solid-state lithium batteries

Strippable and flexible solid electrolyte membrane by coupling Li6.4La3Zr1.4Ta0.6O12 and insulating polyvinylidene fluoride for solid state lithium ion battery

A composite solid electrolyte with a framework of vertically aligned perovskite for all-solid-state Li-metal batteries

3D nanofiber framework based on polyacrylonitrile and siloxane-modified Li6.4La3Zr1.4Ta0.6O12 reinforced poly (ethylene oxide)-based composite solid electrolyte for lithium batteries

Al2O3 Fiber-Reinforced Polymer Solid Electrolyte Films with Excellent Lithium-Ion Transport Properties for High-Voltage Solid- State Lithium Batteries