Abstract:In this study, we used a solution-casting technique to prepare all-solid-state composite polymer electrolytes (CPEs) based on poly(vinyl alcohol)/polyacrylonitrile blends, the ceramic filler Li14Al04Ti16(PO4)3 (LATP, NASICON-type structure), lithium bis(trifluoromethanesulfonyl)imide, and the solid plasticizer succinonitrile (SN) and then investigated their electrochemical stability, ionic transport properties, and interfacial behavior against lithium electrodes The CPEs prepared with optimal concentrations of LATP (20 wt %) and SN (10 wt %) exhibited a maximum ionic conductivity of 1.13 × 10–4 S cm–1 at 25 °C, a Li+-ion transference number of 0.507, and an electrochemical stability window of 5.1 V (vs Li/Li+). This CPE was a free-standing membrane and highly flexible. An all-solid-state Li//LiFePO4 battery assembled with this CPE displayed excellent cycling stability and rate performance at room temperature. A maximum discharge capacity of 159.6 mA h g–1 was achieved at 0.1C. The full cell achieved a discharge capacity of 119.4 mA h g–1 at 0.5C and a capacity retention of 90.5% after 100 cycles at ambient temperature. Therefore, this as-prepared CPE shows great promise for use in all-solid-state lithium-metal batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c02018?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c02018</a>.SEM images of commercial 50050 LFP, particle size distribution and XRD spectrum of LFP, the SEM image of LATP, the EDX spectrum of the LATP powder, heating experiments, the flammability test, stress–strain curves, the i–t curve, AC spectra, the EIS Nyquist plot of the symmetric cell, SEM images of the lithium anode before and after cycling, and AC impedance of the battery (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c02018/suppl_file/ae0c02018_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Flexible Organic–Inorganic Composite Solid Electrolyte with Asymmetric Structure for Room Temperature Solid-State Li-Ion Batteries

Flexible Asymmetric Organic-Inorganic Composite Solid-State Electrolyte Based on PI Membrane for Ambient Temperature Solid-State Lithium Metal Batteries

A High-Performance, Solution-Processable Polymer/ceramic/ionic Liquid Electrolyte for Room Temperature Solid-State Li Metal Batteries

High-Performance Poly(vinylidene fluoride-hexafluoropropylene)-Based Composite Electrolytes with Excellent Interfacial Compatibility for Room-Temperature All-Solid-State Lithium Metal Batteries

Solution-processed poly(vinylidene difluoride)/cellulose acetate/Li1+xAlxTi2-x(PO4)3 composite solid electrolyte for improving electrochemical performance of solid-state lithium-ion batteries at room temperature

Composite Polymer Electrolytes Based on PVA/PAN for All-Solid-State Lithium Metal Batteries Operated at Room Temperature

A promising composite room temperature solid electrolyte via incorporating LLZTO into cross-linked ETPTA/PEO/SN matrix for all solid state lithium batteries

Composite Solid Electrolyte for Solid-State Lithium Batteries Workable at Room Temperature

Room‐Temperature Solid‐State Lithium Metal Batteries Using Metal Organic Framework Composited Comb‐Like Methoxy Poly(ethylene Glycol) Acrylate Solid Polymer Electrolytes

Building a Highly Functional Li1.3Al0.3Ti1.7(PO4)3/poly (vinylidene Fluoride) Composite Electrolyte for All-Solid-state Lithium Batteries

Versatile Inorganic/Polymer Composite Electrolyte Added with 2-Methylsuccinic Anhydride via a Solvent-Free Preparation Method for High-Performance All-Solid-State Li-Metal Batteries: High Voltage, Long Cycle Life, and Room-Temperature Operation

A flexible composite solid electrolyte with a highly stable interphase for dendrite-free and durable all-solid-state lithium metal batteries

Highly Adaptable Poly(ether-acrylate) Solid Electrolyte for Cathode/Electrolyte Interface Integration and Application in Lithium Metal-Free Solid-State Batteries

Localized High Concentration Polymer Electrolyte Enabling Room Temperature Solid-State Lithium Metal Batteries with Stable LiF-rich Interphases

Synergistic Effect of Lithium Salts with Fillers and Solvents in Composite Electrolytes for Superior Room-Temperature Solid-State Lithium Batteries

Strippable and flexible solid electrolyte membrane by coupling Li6.4La3Zr1.4Ta0.6O12 and insulating polyvinylidene fluoride for solid state lithium ion battery

Ultrathin Layered Double Hydroxide Nanosheets Enabling Composite Polymer Electrolyte for All‐Solid‐State Lithium Batteries at Room Temperature

Intercalated Electrolyte with High Transference Number for Dendrite‐Free Solid‐State Lithium Batteries

Flexible Electrolyte and Cathode Membranes for All-Solid-State Batteries Fabricated by a One-Step Solvent Method

Porous Polyamide Skeleton-Reinforced Solid-State Electrolyte: Enhanced Flexibility, Safety, and Electrochemical Performance

Ultrathin, Flexible Polymer Electrolyte for Cost‐Effective Fabrication of All‐Solid‐State Lithium Metal Batteries