Abstract:Poly(ethylene oxide) (PEO)-based solid-state lithium batteries (SSLBs), accompanied by potential high energy density and reliable safety, have attracted wide attention. However, PEO-based solid-state electrolytes (SSEs) are hard to scale up due to their low oxidation stability, low ionic conductivity at room temperature, and relatively poor mechanical properties. Here, a PEO-based ceramic-polymer (PCP) composite SSE is designed. The porous Li1.3Al0.3Ti1.7(PO4)3 (LATP)-coated polyethylene (PE) separator is filled with PEO/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) solution, which possesses both a robust mechanical property and processable flexibility. The results show the PCP membrane effectively suppresses the growth of lithium (Li) dendrites identified by a flat Li deposition. It is attributed to the robustness of the PCP membrane itself and the formation of a mixed ionic/electronic conducting interphase (MCI) intertwined with a solid electrolyte interface (SEI) between the PCP membrane and the Li anode. The MCI-SEI intertwined mixed phase facilitates the homogeneous Li deposition and enhances the cycle stability of the electrolyte/anode interface. Hence, the PCP membrane effectively prevents short-circuiting and shows a good cycling stability of more than 2000 h in a Li/PCP/Li symmetric cell with a current density of 0.2 mA cm-2 at 60 °C. Moreover, the Li/PCP/LiFePO4 all-solid-state battery shows a stable cycling performance with 160 mAh g-1 at 0.2C after 200 cycles at 60 °C. The results show the purposed PCP membrane based on a LATP-coated PE separator is easy to be fabricated and could be practical for many applications.

Li1.5Al0.5Ti1.5(PO4)3 enhanced polyethylene oxide polymer electrolyte for all-solid-state lithium batteries

Aqueous Tape Casting Phosphate Ceramic Electrolyte Membrane for High Performance All Solid-State Lithium Metal Battery

PEO-LITFSI-SiO<sub>2</sub>-SN System Promotes the Application of Polymer Electrolytes in All-Solid-State Lithium-ion Batteries

Recent Advances in Li1+xAlxTi2−x(PO4)3 Solid-State Electrolyte for Safe Lithium Batteries

Polyethylene Glycol Functionalized Polyhedral Cage Silsesquioxane As All Solid-State Polymer Electrolyte for Lithium Metal Batteries

Solid Polymer Electrolyte Reinforced with a Li1.3Al0.3Ti1.7(PO4)3-Coated Separator for All-Solid-State Lithium Batteries

Thin Li1.3Al0.3Ti1.7(PO4)3-based composite solid electrolyte with a reinforced interface of in situ formed poly(1,3-dioxolane) for lithium metal batteries.

Building a Highly Functional Li1.3Al0.3Ti1.7(PO4)3/poly (vinylidene Fluoride) Composite Electrolyte for All-Solid-state Lithium Batteries

An All-Solid-state Lithium Battery Using the Li7La3Zr2O12 and Li6.7La3Zr1.7Ta0.3O12 Ceramic Enhanced Polyethylene Oxide Electrolytes with Superior Electrochemical Performance

Solution-processed poly(vinylidene difluoride)/cellulose acetate/Li1+xAlxTi2-x(PO4)3 composite solid electrolyte for improving electrochemical performance of solid-state lithium-ion batteries at room temperature

Poly(ethylene Oxide)-Li10snp2s12 Composite Polymer Electrolyte Enables High-Performance All-Solid-State Lithium Sulfur Battery

Interface Regulation Enabling Three-Dimensional Li1.3Al0.3Ti1.7(PO4)3-reinforced Composite Solid Electrolyte for High-Performance Lithium Batteries

A Long Cycle Life, All-Solid-State Lithium Battery with a Ceramic–Polymer Composite Electrolyte

Interface engineering of Li<sub>1.3</sub>Al<sub>0.3</sub>Ti<sub>1.7</sub>(PO<sub>4</sub>)<sub>3</ sub> ceramic electrolyte via multifunctional interfacial layer for all-solid-state lithium batteries

Composite polymer electrolyte based on poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for solid-state batteries

A composite solid electrolyte with a framework of vertically aligned perovskite for all-solid-state Li-metal batteries

High-Performance Solid Composite Polymer Electrolyte for all Solid-State Lithium Battery Through Facile Microstructure Regulation

Li6.7La3Zr1.7Ta0.3O12 Reinforced PEO/PVDF-HFP Based Composite Solid Electrolyte for All Solid-State Lithium Metal Battery

A flexible composite solid electrolyte with a highly stable interphase for dendrite-free and durable all-solid-state lithium metal batteries

High Electrochemical Performance Poly(ethylene Oxide)/2,4-Toluene Diisocyante/polyethylene Glycol As Electrolytes for All-Solid-state Lithium Batteries

Preparation and characterization of PAN-LATP composite solid-state electrolyte