Abstract:Solid polymer electrolytes (SPEs) were investigated for several decades due to their good compatibility with electrodes. However, meeting the essential requirements for solid polymer electrolytes, including enhanced ionic conductivity, superior solubility with conductive lithium salts, and robust interface stability when in contact with a Li anode, remains a formidable challenge. In our work, we found that transition metal carbides (NiNbCeC) over mesoporous silica (SBA-15) can be filled into the Polyethylene Oxide (PEO) matrix to form composite solid electrolytes which can greatly improve the ionic conductivity of PEO. We investigate a series of transition metal carbides with varying mass ratios of Cerium (5%, 10%, and 20%) to fabricate All-Solid-State Li-S batteries (ASSLi-S). Our results demonstrate that different mass ratios of Cerium play a pivotal role in enhancing the ionic conductivity of the composite solid electrolytes, reducing impedance levels from 9150 O (20% Ce) to 4000 O (5% Ce) to 1730 O (10% Ce). At room temperature, the high initial specific capacity at 1C and reversible specific capacity after 100 cycles are 525 and 363 mAh/g, 605 and 403 mAh/g, 246.3 mAh/g and 63.28 mAh/g for 5% Ce, 10%, and 20%, respectively. Furthermore, long-term cycling tests of ASSLi-S cells at 0.5C reveal promising performance, with the cell containing 10% Ce solid electrolytes delivering an initial specific capacity of 1165.7 mAh/g and maintaining 335 mAh/g after 200 cycles. This represents a significant breakthrough, demonstrating that PEO-based solid electrolytes can achieve impressive electrochemical results at room temperature. SEM characterization was employed to assess the volume change in the solid electrolyte layer and elemental distribution of solid electrolyte materials through cross-sectional analysis. This analysis revealed that the failure modes of solid-state Li-S cells can also be attributed to the migration of sulfur elements from the cathode to the solid electrolyte layer during the cycling process. XRD was utilized to study the crystallinity of composite solid electrolytes. This study represents a significant stride in the progress of high-performance solid polymer electrolytes for All-Solid-State Li-S batteries, shedding light on the failure modes of such batteries. It underscores the potential of composites based on transition metal carbides in addressing crucial challenges for their practical implementation in Solid-State Lithium-Sulfur Batteries.

Lithium perborate-based composite polymer electrolytes for all-solid-state lithium-ion batteries: performance enhancement and stability

Garnet/polymer solid electrolytes for high-performance solid-state lithium metal batteries: The role of amorphous Li2O2

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

Li7La3Zr2O12 Garnet Solid Polymer Electrolyte for Highly Stable All-Solid-State Batteries

Synergistic Combination of Crosslinked Polymer and Concentrated Ionic Liquid for Electrolytes with High Stability in Solid-State Lithium Metal Batteries

In Situ Construction of Ether-Based Composite Electrolyte with Stable Electrode Interphase for High-Performance Solid State Lithium Metal Battery

Electrochemical Performance of All-Solid-state Lithium Batteries Using Inorganic Lithium Garnets Particulate Reinforced PEO/LiClO4 Electrolyte

Novel PEO-based composite solid electrolytes for all-solid-state Li-S battery

Nickel phosphate nanorod-enhanced polyethylene oxide-based composite polymer electrolytes for solid-state lithium batteries

A promising composite solid electrolyte incorporating LLZO into PEO/PVDF matrix for all-solid-state lithium-ion batteries

Well‐Dispersed Polydopamine In Situ Coated Lithium Montmorillonite Nanofillers Composite Polyethylene Oxide‐Based Solid Electrolyte for All‐Solid‐State Lithium Batteries

Tailored High Cycling Performance in a Solid Polymer Electrolyte with Perovskite-Type Li0.33La0.557TiO3 Nanofibers for All-Solid-state Lithium Ion Batteries

Application of Li6.4La3Zr1.45Ta0.5Mo0.05O12/PEO Composite Solid Electrolyte in High-Performance Lithium Batteries

Polyvinylidene fluoride nanofibers with embedded Li6.4La3Zr1.4Ta0.6O12 fillers modified polymer electrolytes for high-capacity and long-life all-solid-state lithium metal batteries

PEO/garnet Composite Electrolytes for Solid-State Lithium Batteries: from “Ceramic-in-polymer” to “Polymer-in-ceramic”

Li1.5Al0.5Ti1.5(PO4)3 enhanced polyethylene oxide polymer electrolyte for all-solid-state lithium batteries

An agglomeration-free and high ion conductive ceramic-in-polymer composite solid electrolyte modified by fluorocarbon surfactant for enhancing performance of all-solid-state lithium batteries

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

Lithium-rich high entropy oxide with abundant oxygen vacancies for composite polymer all-solid-state Li-S batteries

Composite Electrolytes of Pyrrolidone-Derivatives-peo Enable to Enhance Performance of All Solid State Lithium-Ion Batteries

3D core-shell nanofibers framework and functional ceramic nanoparticles synergistically reinforced composite polymer electrolytes for high-performance all-solid-state lithium metal battery