Abstract:Porphyrins and their derivatives are a unique class of multifunctional and modifiable π-conjugated heterocyclic organic molecules, which have been widely applied in the fields of optoelectronic devices and catalysis. However, the application of porphyrins in polymer electrolytes for all-solid-state lithium-ion batteries (ASSLIBs) has rarely been reported. Herein, porphyrin molecules modified by polyether chains are used for composite solid-state polymer electrolytes (CSPEs) for the first time. The introduction of a modified porphyrin in an electrolyte can not only promote the electrochemical properties by constructing ordered ion channels via the intermolecular interaction between π-conjugated heterocyclic porphyrins, but also significantly improve the mechanical strength and interface contact between the electrolyte membrane and the lithium metal anode. Consequently, the all-solid-state batteries assembled by the modified porphyrin composite polymer electrolyte, LiFePO4 cathodes, and Li anodes deliver a higher discharge capacity of 158.2 mA h g–1 at 60 °C, 0.2 C, which remains at 153.6 mA h g–1 after 120 cycles with an average coulombic efficiency of ∼99.60%. Furthermore, the flexible porphyrin-based composite polymer electrolyte can also enable a Li || LiCoO2 battery to exhibit a maximum discharge capacity of 108.6 mA h g–1 at 60 °C, 0.1 C with an active material loading of 2–3 mg cm–2, which is unable to realize for the corresponding batteries with a pure PEO-based polymer electrolyte. This work not only broadens the application scope of porphyrins, but also proposes a novel method to fabricate CSPEs with improved electrochemical and mechanical properties, which may shed new light on the development of CSPEs for next-generation high-energy-density lithium-ion batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c12086.Additional experimental details including materials, monomer synthesis, characterizations and electrochemical measurements; 1H NMR and UV–vis spectra of the obtained monomers; photographs of the obtained electrolytes; characterizations of the as-prepared CSPE; FTIR, 1H NMR, and XPS spectra of PEO SPE and CSPE; additional cell performances; SEM images of the cycled Li foils; analysis of the SEI of the corresponding batteries; pouch-type cell testing; thermal behavior of pure PEO, PEO-35wt% Li SPE, and CSPE-20wt% HP-35wt% Li; related parameters and the lithium-ion transference number; element ratios of C, F, O, and S; and cell performance of several lithium-metal batteries using PEO-based composite electrolytes with different functional fillers (PDF)All-solid-state pouch cell regaining its original shape and the LED remaining lit (MP4)Pouch-type cell lighting up the LED lamp after being penetrated with a nail (MP4)This article has not yet been cited by other publications.

Composite Electrolytes of Pyrrolidone-Derivatives-peo Enable to Enhance Performance of All Solid State Lithium-Ion Batteries

Application of Li6.4La3Zr1.45Ta0.5Mo0.05O12/PEO Composite Solid Electrolyte in High-Performance Lithium Batteries

PEO/hollow Mesoporous Polymer Spheres Composites As Electrolyte for All Solid State Lithium Ion Battery

Well‐Dispersed Polydopamine In Situ Coated Lithium Montmorillonite Nanofillers Composite Polyethylene Oxide‐Based Solid Electrolyte for All‐Solid‐State Lithium Batteries

Graphene Oxide Enabled Flexible PEO-Based Solid Polymer Electrolyte for All-Solid-State Lithium Metal Battery

Tailored PEO/PEG-PPG Polymer Electrolyte for Solid-State Lithium-Ion Battery

Tailored High Cycling Performance in a Solid Polymer Electrolyte with Perovskite-Type Li0.33La0.557TiO3 Nanofibers for All-Solid-state Lithium Ion Batteries

Optimisation of conductivity of PEO/PVDF-based solid polymer electrolytes in all-solid-state Li-ion batteries

Organic Cationic-Coordinated Perfluoropolymer Electrolytes with Strong Li+-Solvent Interaction for Solid State Li-Metal Batteries

Perfluoropolyether‐terminated Single‐ion Polymer for Enhancing Performance of PEO‐based Solid Polymer Electrolyte

PEO/garnet Composite Electrolytes for Solid-State Lithium Batteries: from “Ceramic-in-polymer” to “Polymer-in-ceramic”

Research Progress and Application of PEO-Based Solid State Polymer Composite Electrolytes

Cationic Cyclopropenium-Based Hyper-Crosslinked Polymer Enhanced Polyethylene Oxide Composite Electrolyte for All-Solid-State Li-S Battery

Application of a Modified Porphyrin in a Polymer Electrolyte with Superior Properties for All-Solid-State Lithium Batteries

Tailoring Stable PEO‐Based Electrolyte/Electrodes Interfaces via Molecular Coordination Regulating Enables 4.5 V Solid‐State Lithium Metal Batteries

A strong Lewis acid imparts high ionic conductivity and interfacial stability to polymer composite electrolytes towards all-solid-state Li-metal batteries

Composite Polymer Electrolyte Incorporating Metal-Organic Framework Nanosheets with Improved Electrochemical Stability for All-Solid-State Li Metal Batteries

Three-dimensional Polyimide Nanofiber Framework Reinforced Polymer Electrolyte for All-Solid-state Lithium Metal Battery

An asymmetric double-layer poly(ethylene oxide)/inorganic composite electrolyte for stable and dendrite-suppressing all-solid-state Li metal battery

Stable Cycling of All‐Solid‐State Lithium Metal Batteries Enabled by Salt Engineering of PEO‐based Polymer Electrolytes

Hexagonal Rodlike Cu-MOF-74-Derived Filler-Reinforced Composite Polymer Electrolyte for High-Performance Solid-State Lithium Batteries