Abstract:In order to enhance the ionic conductivity of PEO based polymer electrolytes and improve the stability of the interface between the lithium electrode and the polymer electrolyte, PEO/LiClO4/nano-SiO2 composite polymer electrolytes were prepared by adding self-synthesized nanometric SiO2 ( NMSIO) or commercial nanometric SiO2 (MN1P and modified MN1P) powder into the PEO/LiClO4 complex. There was 1 similar to 2 orders of magnitude increase in the ionic conductivities for these composite PEO electrolytes. It could reach as high as 1.24 x 10(-5) S/cm at room temperature. There are two reasons of the increase in ionic conductivity. First, the addition of SiO2 powder can suppress the crystallization of PEO. Secondly, the interface between the SiO2 powder and polymer electrolyte also makes a contribution to the increase in ionic conductivity. PEO based composite gel electrolytes were prepared by the addition of plasticizer PC(propylene carbonate) /EC (ethylene carbonate) into the PEO based composite electrolytes. The ionic conductivity was increased by another two orders of magnitude. The highest one reached 2 x 10(-3) S/cm at room temperature. A half-cell of Li \ composite gel electrolyte \ Li was assembled with the above mentioned composite gel PEO electrolyte. The variation of the AC impedance spectra with post-preparing time of the half-cell was measured. It was found that the AC impedance of the passivation layer increased quickly within 144 h, but stabilized gradually in the following time. It revealed that SiO2 powder could suppress the growth of the passivation layer between the composite gel PEO electrolyte and the lithium electrode.

Ionic transport behavior in poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) and LiClO4 complex

Studies on the Ion Transport Properties of LiClO_4-PC-DMC Electrolytes for Lithium Battery

Influences of phase structure on room temperature conductivity of polyethylene oxide/succinonitrile/lithium perchlorate composite electrolytes

PEO-LiClO4-ZSM5 composite polymer electrolyte: II. Effect of ZSM-5 on ionic conductivity

IONIC CONDUCTIVITY AND MOLECULAR MOVEMENT OF COMBLIKE POLYMER SOLID ELECTROLYTES

Thermal, Mechanical Properties and Ionic Conductivity of (PEO)<sub>16</sub>LiClO<sub>4</sub> Electrolytes with Different Shape ZnO

Effects on the Properties after Addition of Lithium Salt in Poly(ethylene oxide)/Poly(methyl acrylate) Blends

Conductivity studies on a new composite polymer electrolyte PEO-LiClO4 - Li1.3Al0.3Ti1.7 (PO4)3

Enhanced lithium ion transference number and ionic conductivity of composite polymer electrolyte doped with organic–inorganic hybrid P123@SBA-15

Salt-induced microphase separation in poly(ε-caprolactone)-b- poly(ethylene oxide) block copolymer

Oxygen vacancies on surface of the TiO2 fillers hinder Li+ conduction in PEO all-solid-state electrolyte

Thermal, mechanical properties and ionic conductivity of (PEO)16LiClO4 electrolytes with different shape ZnO

Effect of Organic-Inorganic Hybrid P123-em-SBA15 on Lithium Transport Properties of Composite Polymer Electrolyte

Atomic insight into Li$^+$ ion transport in amorphous electrolytes Li$_x$AlO$_y$Cl$_{3+x-2y}$ (0.5 $\leq$ x $\leq$ 1.5, 0.25 $\leq$ y $\leq$ 0.75)

Influence of Salt Doping on the Entropy‐Driven Lower Disorder‐to‐Order Transition Behavior of Poly(ethylene Oxide)‐b‐poly(4‐vinylpyridine)

Hydrogen bonding effect on the poly(ethylene oxide), phenolic resin, and lithium perchlorate-based solid-state electrolyte

Peo-Licio4-Zsm5 Composite Polymer Electrolyte - I. Electrochemical Study

Studies on Composite Polymer Electrolyte Peo/Liclo4/Nano-Sio2

Temperature Dependent Ionic Transport Properties in Composite Solid Polymer Electrolytes

Effect of plasticizer on the ion-conductive and dielectric behavior of poly(ethylene carbonate)-based Li electrolytes

Ionic transport studies in PVDF-HFP-PMMA-(PC+DEC)-LiClO4 gel polymer electrolyte