Abstract:Ferrotitanium slag has attracted attention owing to its high aluminum content, which can partly replace the alumina in the traditional alumina/silicon carbide multiphase refractory materials. Alumina/calcium hexaaluminate ceramic composites have been prepared using ferrotitanium slag. However, previous studies neglected the utilization of valuable titanium resources in ferrotitanium slag. Therefore, in this study, calcium hexaaluminate/aluminum titanate composite ceramics were prepared using ferrotitanium slag and aluminum hydroxide as the main raw materials and titanium dioxide (TiO2) as an additive. The influence of TiO2 concentration on the phase composition, microstructure, and mechanical and thermal expansion properties of the ceramics was studied. The results showed that calcium hexaaluminate and aluminum titanate were generated in situ and the composite was reinforced by calcium hexaaluminate, providing flexural strength to the material. The Mg2+ and Fe3+ impurities present in the ferrotitanium slag formed a solid solution with aluminum titanate, accelerating the production of aluminum titanate while inhibiting its thermal decomposition. With the addition of TiO2 (2–20 wt%), the aluminum titanate formed in the ceramic effectively reduced the thermal expansion coefficient of the material. However, at concentrations > 5 wt%, the rutile phase and excessive liquid phase in the sample resulted in a significant reduction in the flexural strength at room temperature. At 5 wt% TiO2, the main crystal phases of the ceramic composite were calcium hexaaluminate and aluminum titanate. The composite exhibited a flexural strength of 19 MPa at room temperature(≈25 ℃), and a thermal expansion coefficient lower than 4 × 10−6 °C−1 at 1100 °C.

The Summary of Aluminium Titanate Ceramics

Structure ,thermal Expansion and Thermal Stability of Aluminium Titanate Materials

Intragranular Porous Aluminum Titanate Ceramics with Low Thermal Expansion and High Strength Simultaneously

PREPARATION AND PROPERTIES OF ALUMINUM TITANATE SOLID SOLUTION CERAMICS

RESEARCH ON SOLID-PHASE SYNTHESIS AND MODIFICATION OF ALUMINUM TITANATE

Research on Cerium Oxide and Magnesium Oxide Composite Modified Aluminum Titanate Composite Ceramics

Preparation and properties of Al2O3/Al-2(1-0.2)Mg0.2Ti(1+0.2)O5 matrix ceramic composite

Effect of Sintering Temperature on the Structures and Properties of Porous Aluminium Titanate Ceramics

Effect of magnesia and silica additives on properties of aluminium titanate ceramic

Influence of Titanium Sol on the Surface Structure and Properties of Alumina Hollow Ball

Effect Of Talc And Titania On The Microstructure And Mechanical Properties Of Alumina Ceramics

Introduction to Titanium and Titanium Alloys

Development Status, Applications and Perspectives of Advanced Intermetallic Titanium Aluminides

Thermal durability of aluminum titanate-mullite composites with high thermal shock resistance

Fabrication of CaAl12O19‐CaTiO3 composites and their potential usage for TiAl alloy smelting

A Study on Al2TiO5-Al2O3 Composite Ceramics

Progress on Manufacturing Technology of High Temperature Titanium Alloys

Ceramic composites based on in situ calcium hexaaluminate/aluminum titanate prepared from ferrotitanate slag

Progress in Research on High Temperature Oxidation Resistance of TiAl Intermetallics

Aluminium Titanate-Aluminia Composites Synthesized by Heterogeneous Precipitation Method

Recent Achievements and Future Directions of TiAl-Based Intermetallic Compounds