Abstract:To solve the flow velocity field in rectangular subsonic jet, the method of conformal mapping in the complex analysis has been used to transform the circular plane to a rectangular plane. So the theory about the axisymmetric nozzle jet flow field is extended to the rectangular nozzle jet. By this method, we can avoid the numerical simulation by introducing auxiliary equations, discretization and setting the boundary conditions to solve the three-dimensional N-S equation. The quantitative impact on the jet structure is obtained: the bigger the aspect ratio AR is, the longer the length of the jet core is, and the slower the decay is, when rectangular nozzle aspect ratio AR takes 2, 4, 8, respectively. When nozzle area of 10cm2, 20cm2, increasing the aspect ratio could not only shorten the core length but also speed up the attenuation. The velocity contours in the wide and narrow symmetry plane through the orifice center of symmetry with a nozzle size 1 �� 5mm2 and vents Mach number Ma=0.3 are studied. The results show that in the wide and narrow plane of jet there exist core area and decay region. It is found for the first time that the jet velocity distribution width shows itself as a "saddle" mainly concentrates in the jet core segment. Compared with the existing experimental results, it is found that the minimum core length error reaches to 30%, the axial velocity distribution agrees with the experimental results very well, the error is less than 5%, the correctness of this theory is verified. The results provide theoretical guidance for further study on the rectangular subsonic jet and parameter optimization design of rectangular vents.

Experimental research on velocity distribution within jet loop reactor

Gas Holdup and Liquid Velocity Distributions in the Up Flow Jet-Loop Reactor

Gas Holdup and Liquid Velocity Distribution in a Jet Loop Reactor

Experimental Investigation on Multiscale Hydrodynamics in a Novel Gas–liquid–solid Three Phase Jet‐loop Reactor

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Hydrodynamics in a jet bubbling reactor: Experimental research and mathematical modeling

Gas–Liquid Flow Characteristics and Performance Optimization of Industrial Downflow Jet Loop Reactor Based on Computational Fluid Dynamics

Flow Behavior of Liquid Phase in Jet-loop Reactor

FLOW AND DIFFUSION IN SELF-ASPIRATED REVERSE FLOW JET LOOP REACTOR

Experimental research of the bubble distribution in a jet bubbling reactor

The numerical research for heat transfer of liquid-solid coupling on SRM nozzle throat

Particle Velocity Distribution in a Novel Draft Tube-Lifted Gassolid Air Loop Reactor

Study on the Macromixing Characteristic of the Jet Loop Reactor

Effects of Internal Structures on Mass Transfer Performance of Jet Bubbling Reactor

Theoretical study of subsonic rectangular turbulent jet with conformal mapping method

Experimental study and simulation of residence time distribution of liquid in jetentrained bed reactor

Energy Dissipation Distribution in a Draft Tube-lifted Gas-Solid Air Loop Reactor

Experimental investigation and model improvement on the atomization performance of single-hole Y-jet nozzle with high liquid flow rate

Experimental Study about Mixing Characteristic and Enhancement of T-jet Reactor

Flow characteristics and mixing properties in a high velocity liquid—solid loop reactor