Experimental investigation of internal and external flow fields of jetting nozzles with different structures
Tianwen Jiang,Zhongwei Huang,Jingbin Li,Yisu Zhou,Chao Xiong
DOI: https://doi.org/10.1016/j.petrol.2022.110891
IF: 5.168
2022-10-01
Journal of Petroleum Science and Engineering
Abstract:Jetting has been widely used in the petroleum fields, the nozzle has been investigated for a long time and the structure has been optimized for different applications as the key part of jetting. However, most of these researches are focused on the outer flow with simulations, the real flow characteristics are not been revealed clearly. A visual experimental platform was built with Particle Image Velocimetry (PIV) and a high-pressure pump. 40 nozzles of different profiles were machined and measured. The internal and outer flow fields were captured by PIV under low velocity, and the pressure drop and flow displacement were measured under high-pressure conditions in this paper. The jetting performance such as discharge coefficient, flow core length, jet angle, and velocity distributions were analyzed. The internal flow characteristics including the flow field near the nozzle wall were captured by PIV. The converging angle and the throat section length play an important role in the jetting performance and are suggested to be set to 15° and 3 times the nozzle diameter when designed. The throat length has little effect on the flow field of the streamlined nozzle compared to the cone-straight nozzle, especially the concave curve nozzle. The vortex generated at the corner and the entrance of the throat section can indicate the boundary layer separation and transition, which agrees with our previous simulation work. All work will provide theoretical support for the design of the nozzle on-site application.
energy & fuels,engineering, petroleum