Abstract:Most engineering structures are exposed to various harsh environments, such as temperature fluctuations and humidity cycles, simultaneously. Additionally, moisture transfer and corrosive ion transport in concrete are driven by humidity gradients. Therefore, studying Chloride transport in concrete under constant humidity conditions is a meaningful research project. In this work, a new experimental setup was designed, and the Chloride diffusion behavior of concrete under a continuous humidity environment and NaCl immersion was investigated. Meanwhile, to accurately evaluate the internal humidity of concrete, humidity sensors were applied to the concrete. Additionally, the impacts of the water-binder ratio (w/b) and ambient humidity on the humidity diffusion coefficient, free Chloride content and bound Chloride content in concrete were evaluated. The microstructure was characterized by scanning electron microscopy, X-ray diffraction and mercury intrusion porosimetry. The results show that the content of free Chloride increases with an increasing w/b ratio. The humidity diffusion coefficient of concrete during water absorption (continuous high humidity environment) is significantly higher than that during water loss (continuous dry environment). Furthermore, under the drying condition, the Chloride content and the humidity diffusion coefficient on the concrete surface gradually increased, while during the wetting procedure, the Chloride content inside the concrete increased, and the humidity diffusion coefficient gradually decreased. However, the bound Chloride content inside the concrete is not affected by the humidity level in the environment. In the wetting environment, the calcium hydroxide in the matrix is gradually consumed, and the Chloride diffuses to the matrix to form more Friedel's salt and calcium carbonate. Moreover, lowering the w/b ratio or increasing the ambient humidity can enhance the formation of more hydrated compounds (C–S–H gel), which can reduce the total porosity and can also improve the ability of concrete to resist Chloride diffusion. Overall, this study provides a better understanding of and insight into the design and maintenance of seaside RC infrastructures.

Experimental Study on Relationship Between Shrinkage Strain and Environmental Humidity of Concrete

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

Influence of Steel Reinforcement on Shrinkge Stress of Concrete

Moisture Diffusion Coefficient of Concrete under Different Conditions

Experimental and Theoretical Studies on Autogenous Shrinkage of Concrete at Early Ages

Shrinkage And Interior Humidity Of Concrete Under Dry-Wet Cycles

EXPERIMENTAL INVESTIGATION ON CONCRETE PERFORATED BRICK WALL SHINKAGE AT DIFFERENT AGES

Integrative Studies on Autogenous and Drying Shrinkages of Concrete at Early-Age

Tests and Simulations of Interior Humidity and Shrinkage of Concrete under Sealed Condition

Tests and Simulations on Shrinkage of Concrete at Early-Age

Experimental Study on Chloride Ion Transport in Concrete Structure under Shear Stress

Experimental Study on the Internal Relative Humidity in Concrete under Dry-Wet Cycles

An experimental study on the influence of continuous ambient humidity conditions on relative humidity changes, chloride diffusion and microstructure in concrete

Influence of Relative Humidity on Shrinkage of Mortar and Concrete

Evaluation of Shrinkage Induced Cracking in Concrete with Impact of Internal Curing and Water to Cement Ratio

Experimental Study on Some Factors Affecting Fracture Property of Concrete

Effect of Different Humidity-Controlling Modes on Microstructure and Compressive Behavior of Ordinary Concrete

Effects of water-binder ratio and coarse aggregate content on interior humidity, autogenous shrinkage, and drying shrinkage of concrete

Theoretical Modeling and Verification of Concrete Moisture Diffusion Surface Factor

Interior Relative Humidity of Normal- and High-Strength Concrete at Early Age

Integrative Study on the Effect of Internal Curing on Autogenous and Drying Shrinkage of High-Strength Concrete