Abstract:For many years, Si1-yGey alloys have been applied in the semiconductor industry due to the ability to adjust the performance of Si-based nanoelectronic devices. Following this alloying approach of group-IV semiconductors, adding tin (Sn) into the alloy appears as the obvious next step, which leads to additional possibilities for tailoring the material properties. Adding Sn enables effective band gap and strain engineering and can improve the carrier mobilities, which makes Si1-x-yGeySnx alloys promising candidates for future opto- and nanoelectronics applications. The bottom-up approach for epitaxial growth of Si1-x-yGeySnx, e.g., by chemical vapor deposition and molecular beam epitaxy, allows tuning the material properties in the growth direction only; the realization of local material modifications to generate lateral heterostructures with such a bottom-up approach is extremely elaborate, since it would require the use of lithography, etching, and either selective epitaxy or epitaxy and chemical-mechanical polishing giving rise to interface issues, non-planar substrates, etc. This article shows the possibility of fabricating Si1-x-yGeySnx alloys by Sn ion beam implantation into Si1-yGey layers followed by millisecond-range flash lamp annealing (FLA). The materials are investigated by Rutherford backscattering spectrometry, micro Raman spectroscopy, X-ray diffraction, and transmission electron microscopy. The fabrication approach was adapted to ultra-thin Si1-yGey layers on silicon-on-insulator substrates. The results show the fabrication of single-crystalline Si1-x-yGeySnx with up to 2.3 at.% incorporated Sn without any indication of Sn segregation after recrystallization via FLA. Finally, we exhibit the possibility of implanting Sn locally in ultra-thin Si1-yGey films by masking unstructured regions on the chip.

The Enhancement Of The Photoconductivity Of A-Sisn(Cl-H) Alloys By Means Of Gd Technique

Optical Properties of GD A-Si:H/a-si1−xcx:h Superlattices

Enhanced Electrical Conductivity and Photoconductive Properties of Sn-doped Sb2Se3 Crystals

Crystal Structure and Photo-Luminescence of Gd3Ga2(Al3-ySiy)(O12-yNy):Ce3+ Phosphors for AC-warm LEDS

Ge1−xSnx alloys: Consequences of band mixing effects for the evolution of the band gap Γ-character with Sn concentration

Improving the Optical and Thermoelectric Properties of Cs2InAgCl6 with Substitutional Doping: A DFT Insight

Study on the mechanical and optical properties of SiSn alloy by first principles

Study of Properties of A-Si1-xgex:H Prepared by SAP-CVD Method

Device-grade A-Sige:H Alloys Prepared by Nanometer Deposition/h2 Plasma Annealing Method

Tuning of electronic properties of co-evaporated Ag:SnS thin films for heterojunction devices

Alloying Strategy for Developing a Single-Band Warm White Emitting Material Cs2NaGdCl6:Bi3+ via Ag+ Co-Doping

Structure and photoelectric properties of hydrogenated amorphous silicon-germanium alloys produced by high hydrogen dilution method

Tin-assisted growth of ε-Ga 2 O 3 film and the fabrication of photodetectors on sapphire substrate by PLD

Tin-induced Enhancement of Photoluminescence and Crystal Growth in Si-rich Silica Films

Formation of Direct Energy Gap Group IV Semiconductor Alloys and Quantum Dot Arrays in Sn x Si 1−x /Si and Sn x Ge 1−x /Ge Alloy Systems

Bandgap engineering of lead-free double perovskite Cs2NaBiCl6 through indium and silver alloying

Effect of atomic bonding configuration on optical properties of a-Si1−xCx:H thin film

Broadband SnS/Te Photodetector to Long-Wavelength Infrared: Breaking the Spectrum Limit Through Alloy Engineering.

Effect of Phosphorus Doping on the Structural Properties in Nc-Si:H Thin Films

Si1-x-yGeySnx alloy formation by Sn ion implantation and flash lamp annealing

Facile Fabrication of Eutectic Gallium-Indium Alloy Nanostructure and Application in Photodetection.