Abstract:Purpose This paper aims to develop a model that reflects the current transformer (CT) core materials nonlinearity. The model enables simulation and analysis of the CT excitation current that includes the inductive magnetizing current and the resistive excitation current. Design/methodology/approach A nonlinear CT model is established with the magnetizing current as the solution variable. This model presents the form of a nonlinear differential equation and can be solved discretely using the Runge–Kutta method. Findings By simulating variations in the excitation current for different primary currents, loads and core materials, the results demonstrate that enhancing the permeability of the B–H curve leads to a more significant improvement in the CT ratio error at low primary currents. Originality/value The proposed model has three obvious advantages over the previous models with the secondary current as the solution variable: (1) The differential equation is simpler and easier to solve. Previous models contain the time differential terms of the secondary current and excitation flux or the integral term of the flux, making the iterative solution complicated. The proposed model only contains the time differential of the magnetizing current. (2) The accuracy of the excitation current obtained by the proposed model is higher. Previous models calculate the excitation current by subtracting the secondary current from the converted primary current. Because these two currents are much greater than the excitation current, the error of calculating the small excitation current by subtracting two large numbers is greatly enlarged. (3) The proposed model can calculate the distorted waveform of the excitation current and error for any form of time-domain primary current, while previous models can only obtain the effective value.

Transient Performance Simulation for Current Transformers

Simulation and Analysis of Electromagnetic Properties at the Secondary Port of Electronic Current Transformers Under Very Fast Transient Overvoltage

Transient Modelling of Loss and Thermal Dynamics in Power Semiconductor Devices

Research on Transient Electric Field Distribution of High-Frequency Transformers Based on COMSOL and SIMULINK Co-simulation

Modeling and Simulation Analysis of Current Transformer Based on Magnetizing Current As the Solution Variable

Design and Simulation of a New Model for Air‐gapped Current Transformers

A reluctance-based electromagnetic transient model for the Sen Transformer with inter-turn fault

A Coupled 3D Finite Element-Circuit Model for the Numerical Analysis of Small Time Scale Transients of an Insulated Gate Bipolar Transistor Power Electronics Device

Modeling and Simulation of Air-Gapped Current Transformer Based on Preisach Theory

Transient model for VSC-HVDC and its control design

Analytical Modeling for Transient Probe Response in Pulsed Eddy Current Testing

Impact on Transient State Stability of Power System by Solid State Current Limiter

Infulence of Current Transformer Saturation on the Distance Protection

HVDC Electromechanical Transient Model and Comparison with HVDC Electromagnetic Transient Model

Dynamic Electromagnetic Force Analysis of a Power Transformer with Regulated Windings

THE INFLUENCE OF CURRENT TRANSFORMER SATURATION ON BUS PROTECTION

On switching transient modeling and analysis of electronic on-load tap-changers based Sen transformer

A High Efficiency Modeling Method for Electromagnetic Transient Simulation of Large Scale AC/DC Power System

A Novel Transient Saturation Detection Method for P-Class Current Transformer Using Improved Hausdorff Distance Algorithm

Improved lumped parameter model for transformer fast transient simulations

A Novel Current Transformer Based on Virtual Air Gap and Its Basic Measuring Characteristics