Abstract:Purpose This paper aims to develop a model that reflects the current transformer (CT) core materials nonlinearity. The model enables simulation and analysis of the CT excitation current that includes the inductive magnetizing current and the resistive excitation current. Design/methodology/approach A nonlinear CT model is established with the magnetizing current as the solution variable. This model presents the form of a nonlinear differential equation and can be solved discretely using the Runge–Kutta method. Findings By simulating variations in the excitation current for different primary currents, loads and core materials, the results demonstrate that enhancing the permeability of the B–H curve leads to a more significant improvement in the CT ratio error at low primary currents. Originality/value The proposed model has three obvious advantages over the previous models with the secondary current as the solution variable: (1) The differential equation is simpler and easier to solve. Previous models contain the time differential terms of the secondary current and excitation flux or the integral term of the flux, making the iterative solution complicated. The proposed model only contains the time differential of the magnetizing current. (2) The accuracy of the excitation current obtained by the proposed model is higher. Previous models calculate the excitation current by subtracting the secondary current from the converted primary current. Because these two currents are much greater than the excitation current, the error of calculating the small excitation current by subtracting two large numbers is greatly enlarged. (3) The proposed model can calculate the distorted waveform of the excitation current and error for any form of time-domain primary current, while previous models can only obtain the effective value.

Modeling and Simulation of Air-Gapped Current Transformer Based on Preisach Theory

Design and Simulation of a New Model for Air‐gapped Current Transformers

A Novel Current Transformer Based on Virtual Air Gap and Its Basic Measuring Characteristics

Modeling and Simulation Analysis of Current Transformer Based on Magnetizing Current As the Solution Variable

Simulation and Analysis of Electromagnetic Properties at the Secondary Port of Electronic Current Transformers Under Very Fast Transient Overvoltage

Transmission Line Model for a Shielded TWP with Apertures and Generalization to Braided–Shielded TWP Cables

New Study on the Principle of Air Gapped Core Current Transformer

High-frequency Equivalent Circuit Modeling for Overvoltage Detection

An Analytical Model of Air-Gap-Core Current Transformer Considering Loading Effect

On-line Demagnetization Method for an Iron Core CT

Modeling and Transfer Characteristics Simulation Analysis of Electronic Current Transformers

Transient Performance Simulation for Current Transformers

Modeling of Air Gap Magnetic Characteristics of Anode Saturable Reactors under Impulse Current Excitation

Modeling And Simulation For Conducted Common-Mode Current In Switching Circuits

Infulence of Current Transformer Saturation on the Distance Protection

Air gap design of current sensor based on closed loop Hall Effect

Modeling Method of High-frequency Equivalent Circuit of Current Transformer for Overvoltage Detection

Research on the Practicality of Current Transformer Saturation Detection Using the Magnetic Restraint Principle

Modeling And Simulation Of Magnetizing Inrush Current Of Large Power Transformers

A novel measurement‐protection‐integrated current transformer based on hybrid core and magnetic field sensor

Numerical Simulation Analysis on Core Structure Optimization of Heavy Protective Current