Abstract:This paper investigates the clutch control problem for automotive transmission systems. This paper focuses on the pressure tracking control for a wet clutch, which has a much shorter stroke and asks for a more precise position and pressure regulation. The system dynamics are highly nonlinear, and the developed model includes unmodeled dynamics and parameter uncertainties. All these factors will influence the closed-loop system performance if not considered carefully during the control design, which makes the control synthesis for clutch systems challenging. Compared with the existing sliding-mode control (SMC) method, an improved method based on nonlinear sliding mode is presented in this paper to further improve the convergence rate and tracking precision of the closed-loop clutch system. This controller ensures that the pressure tracking error not only reaches the sliding manifold in finite time but converges to the equilibrium point in finite time as well. Moreover, considering the chattering phenomenon caused by high switching gains, a composite terminal SMC (TSMC) method based on uncertainty observer is proposed to reduce chattering. Using an extended state observer (ESO) technique, an uncertainty observer is designed for estimating the model uncertainties of pressure dynamics, pressure-reducing-valve flow dynamics, and estimation error of piston displacement. Then, a feedforward compensation term is combined with the terminal-sliding-mode feedback control. Thus, the composite terminal-sliding-mode controller may take smaller control gains for the whole pressure tracking procedure without sacrificing uncertainty compensation performance. Experimental results based on an xPC Target platform of the clutch system are provided to show the superiority of the proposed methods.

A Study on the Start Process Simulation of a Dual Clutch Automatic Transmission Based on Fuzzy Control

Multi-state control strategy of starting for a wet friction clutch via a fuzzy logic algorithm

Wet Dual Clutch Launching Adaptive Control Considering Service Time

Coordinated Clutch Slip Control for the Engine Start of Vehicles with P2-hybrid Automatic Transmissions

Analysis of Clutch Engagement Judder and Its Influence Factors

Simulation Of Wet-Clutch Short-Time Load End Speed Control System On Amesim

Research on the Soft-Starting Characteristics of Wet Clutches in TBM Cutter-Head Driving System.

Integrated control strategy for the dual clutch transmission druing the upshift process

Thermo-Mechanical Coupling Characteristics of Dry Clutch Under Different Automotive Starting Modes

Study on the control law of automated mechanical transmission clutch

Design and Implementation of Clutch Control for Automotive Transmissions Using Terminal-Sliding-Mode Control and Uncertainty Observer

Hierarchical Control of Starting Process for Wet Dual Clutch Transmission Based on Direct-Drive Pump-Controlled Hydraulic Actuator

Engagement Control of Automated Clutch for Vehicle Launching Considering the Instantaneous Changes of Driver's Intention

Torque coordinating robust control of shifting process for dry dual clutch transmission equipped in a hybrid car

Influence of the driving environment on the dynamic characteristics of a DCT vehicle starting considering the longitudinal and vertical coupling model

Adaptive torque control of wet dual clutch based on dynamic friction coefficient estimation

Simulation Analysis of Tractor AMT Shifting Process Based on Fuzzy Optimization of Downshifting

Automatic Clutch Control Based on Estimation of Resistance Torque for AMT

Optimal Gear Shift Control of Two-Speed Dual-Clutch Transmission in Electric Vehicle for Smoothness and Friction Loss Reduction

Test and Research for Fuzzy Control on Automatic Transmission

Research on clutch position control based on backstepping method for small-sized tractors