Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. In this study, a novel TCU control structure and algorithms including also dynamic model of the transmission will perform the gear shifting of automatic transmissions used in tracked military vehicles are designed. In case of inherent wear of the clutches, the clutch parameters are estimated by means of an adaptation algorithm that uses only the information from the transmission input and output speed sensors. These estimated clutch parameters are used in clutch torque calculation is utilized by control algorithms. For the clutch speed control in the inertia phase, a PID control structure with a negative feedforward term that cancels the nonlinearities of the system is proposed. The feedforward term utilizes the estimated wear clutch coefficients in the calculation of friction coefficients. The parameters of the PID controller are optimized by a genetic algorithm. The designed all structure are firstly tested on a MATLAB/Simulink power train simulation model, and then tested using a unique transmission on a transmission dynamometer test bench to examine its suitability for real transmission scenarios. The performances of proposed PID control and a backstepping nonlinear controller that we constructed for the tracked vehicles are compared with and without clutch wear. Maximum tracking error is decreased by 98% with proposed adaptive PID control structure with nonlinear feedforward term compare to backstepping controller. In the case of clutch wear, the back-stepping control exists in the literature has been found to result in oscillation. By updating the estimated friction coefficient from adaptation algorithm, in the backstepping controller, it is concluded that these oscillations can be eliminated. Additionally, on-off solenoid valves, are widely used, are known to cause torque interruptions and jerks during gear shifting. It has been observed the control structure presented in this study reduced the jerks by one quarter.

Research on clutch position control based on backstepping method for small-sized tractors

Compound Sliding Mode Motion Trajectory Tracking Control of an Electro-Pneumatic Clutch Actuator While Maximizing Its Stiffness

Simultaneous Control of Motion and Maximized Stiffness for an Electro-Pneumatic Clutch Actuator Based on Pressure Observers

Research and Application of Intelligent Control Method of Small Type Loader Actuator

Analysis and Modeling for Electro-pneumatic AMT System

Study on the control law of automated mechanical transmission clutch

Trajectory tracking for agricultural tractor based on improved fuzzy sliding mode control

Position Control of Gear Shift based on Sliding Mode Active Disturbance Rejection Control for Small-Sized Tractors

Dynamic modeling, clutch parameter adaptation, and control of automatic transmission for tracked vehicles

An improved adaptive position tracking strategy for automatic shift actuator with uncertain parameters

Automatic Clutch Control Based on Estimation of Resistance Torque for AMT

Design and Implementation of Clutch Control for Automotive Transmissions Using Terminal-Sliding-Mode Control and Uncertainty Observer

Position-based impedance torque control for automatic clutch with robust predefined-time stability guarantee

A Modified Predictive Functional Control with Sliding Mode Observer for Automated Dry Clutch Control of Vehicle

Engagement Control of Automated Clutch for Vehicle Launching Considering the Instantaneous Changes of Driver's Intention

Shift Modeling Based on Long Short-Term Memory for Manual Transmission System and Shift Process Improvement by Using Bionic Optimization

Hierarchical Control of Starting Process for Wet Dual Clutch Transmission Based on Direct-Drive Pump-Controlled Hydraulic Actuator

Simulation Analysis of Tractor AMT Shifting Process Based on Fuzzy Optimization of Downshifting

Robust Output Feedback Controller with High-Gain Observer for Automatic Clutch

Simultaneous Estimation and Receding Horizon Sliding Control of Dog Clutch Coupling with Backlash for Rear Electrical Drivelines

Control Strategy of Shuttle Shifting Process of Agricultural Tractor During Headland Turn