Abstract:This paper presents a detailed investigation of the dry clutch engagement process, and vehicle start-up judder phenomenon that could result in the deterioration of vehicle ride comfort. Elasto-plastic friction model is elaborated through the slider-pulley system, which shows some friction characteristics such as presliding, stick-slip motion, Stribeck effects, etc., and applied to dry clutch. The axial compression characteristics of three elastic parts, which include diaphragm spring, cushion spring, and link strip have been taken into consideration, and nonlinear relationship between the release bearing travel and the clutch clamp force is also established. The powertrain system model of front-engine and front-wheel-drive vehicle equipped with manual transmission is set up to recreate the start-up judder phenomenon in the numerical simulation and analyze its mechanism. The sudden transfer of the engine torque during the clutch engagement process results in the initial judder, which can be supposed as the step response of system and is initially weakened due to the damping of the powertrain system. Then the judder gradually strengthens and gets in the most severe vibrance when the clutch is about to get in to the fully engaged state, which is related to the frictional characteristics that forms a closed-loop positive feedback system, as well as the frequent state transitions between sliding state and engaged state. The positive slope of Stribeck effect as well as the reduction of absolute value of negative slope can both effectively suppress the start-up judder, and the apparent judder occurs only if the negative slope is outside of a certain range, instead of in all of the range. In addition, the fluctuation of clutch clamp force can aggravate the start-up judder, in which a more chaotic oscillation is emerged.

Analysis of Clutch Engagement Judder and Its Influence Factors

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Analysis and Modeling for Electro-pneumatic AMT System

Simulation and Experiment on Dynamic Engagement Characteristics of Wet Clutch

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Clutch Engagement Control Based on Stability Analysis

Dynamic analysis of vehicle start-up judder based on elasto-plastic friction model and dry clutch maneuvering characteristic

Simulation Research on the Drag Torque of Disengaged Wet Clutches

Effects of vehicle driveline parameters and clutch judder on gearbox vibrations

Study of the Judder Characteristics of Friction Material for an Automobile Clutch and Test Verification

Modeling and Stability Analysis of Wedge Clutch System

Dynamics modeling and analysis of the multistage planetary gear set-bearing-rotor-clutch coupling system considering the tooth impacts of clutches

Simulation and Experimental Study of Engagement Process with Groove Consideration

Impact Analysis of the Cushion Spring on the Dry Clutch Torque Transmissibility

A Nonlinear Control for Clutches with Multistage Vibroisolation

Analysis of Dynamic Engaged Characteristics of Wet Clutch in Variable Speed Transmission of a Helicopter

Analysis on the Engaging Process of Vehicle Clutch

Stability Analysis of Motor-Driven Actuators in Dry Clutches with Nonlinear Stiffness Element.

Modeling and Analysis of Gear-Shifting Process of Motor-Transmission Coupled Drive System

Investigation of engagement characteristics of a multi-disc wet friction clutch

Influence of the driving environment on the dynamic characteristics of a DCT vehicle starting considering the longitudinal and vertical coupling model