Abstract:In the short/vertical take-off and landing aircraft propulsion system, the vertical take-off/landing and rapid flight are switched through the engagement and disconnection of the dry friction clutch. The smooth and rapid connection of the friction clutch is crucial for the mobility and reliability of this type of aircraft. However, the friction clutch vibrates and generates a large amount of heat at high speed, which affects the engagement performance of the clutch. In practice, when the engagement pressure rises quickly, the clutch engagement time is short, and the temperature rise is small, but the impact torque is large, and vice versa. In view of this problem, with a short/vertical take-off aircraft dry friction clutch as the research object, considering the nonlinear variation of friction coefficient and lift fan load torque, the dynamics model and temperature field model of the high speed difference dry friction clutch are established to analyze the clutch engagement time, impact torque, and temperature change. The engagement test at the high speed of the clutch shows that the simulation results of the kinetic model and temperature field model are consistent with the test results. To realize low temperature rise, low impact torque, and short engagement time, the variable slope engagement pressure control method is proposed. Compared with the traditional fixed slope engagement pressure, the proposed variable slope engagement pressure can reduce the engagement time, impact torque and temperature rise simultaneously. The research results can provide a reference for the friction clutch engagement control of short-range take-off and landing aircraft, reduce the development cost of such aircraft, and improve the reliability of the design.

Investigation of engagement characteristics of a multi-disc wet friction clutch

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Simulation and Experiment on Dynamic Engagement Characteristics of Wet Clutch

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Analysis of Clutch Engagement Judder and Its Influence Factors

Simulation Research on the Drag Torque of Disengaged Wet Clutches

Parametric Analysis of the Drag Torque Model of Wet Multi-Plate Friction Clutch with Groove Consideration

Study on the engagement characteristics of wet multi-plate friction clutch based on separating spring

Analysis of Dynamic Engaged Characteristics of Wet Clutch in Variable Speed Transmission of a Helicopter

Investigation of thermal behavior of a novel multi-conical friction pair during wet clutch's engagement based on finite difference method

Simulation and Experimental Study of Engagement Process with Groove Consideration

Influences of the Contact State between Friction Pairs on the Thermodynamic Characteristics of a Multi-Disc Clutch

Analysis on the Engaging Process of Vehicle Clutch

Effects of operating conditions on the tribological behavior of a wet multi-disc clutch during the running-in process

Engagement/Disengagement Characteristics of Pull-Type Diaphragm Spring Clutch for Heavy-Duty Commercial Vehicles

Study on the Engagement Characteristics and Control Strategy of High Speed Difference Dry Friction Clutch

Modeling and analysis of bending and torsional coupling vibration response of multi-piece wet friction clutch

Influence of Material Parameters on the Contact Pressure Characteristics of a Multi-Disc Clutch

Influence of Groove Type on Friction Coefficient of Wet Friction Clutch Pair

Nonlinear Dynamic Characteristics of Rub-Impact Process at High Circumferential Velocities in No-Load Multiplate Wet Clutch

Modeling of the Drag Torque of the Disengaged Grooved Wet Clutches with Waviness