Abstract:Wet friction clutch is the key functional component of the high-speed helicopter variable-speed transmission system, which is used to change the power transmission path. In the engagement process of wet friction clutch, the driving/driven disc will produce drag torque under the shearing of lubricating oil, which reduces the transmission efficiency. This unnecessary drag torque reduces efficiency and increases clutch temperature. The temperature increase promotes the wear of gears and bearings and the aging deformation of friction plates, which leads to local wear and reduces the service life of the clutch. From the principle of wet friction clutch, the oil groove structure is directly related to the drag torque and the temperature rise of friction disc. It is very important for the long-distance flight and service life of high-speed helicopters to obtain the groove structure with low drag torque and low temperature rise. In order to solve this problem, taking the wet friction clutch of a high-speed helicopter as the research object, based on the radial and annular compound groove, the thermal-fluid-solid coupling simulation model of the wet friction clutch is established to obtained the flow characteristics and temperature field distribution of the lubricating oil in the friction disc oil groove, and to analyze the influence law of the oil groove structure parameters on the drag torque and temperature field. In order to improve the transmission efficiency and the service life of friction disc, Taguchi experiment and non-dominated neighborhood immune algorithm were used to optimize the structural parameters of the oil grooves. The comparison results show that the optimized structural can effectively reduce the drag torque and the temperature rise. This work can provide a theoretical reference for the structure design of a wet friction clutch.

Influence of Groove Type on Friction Coefficient of Wet Friction Clutch Pair

Parametric Analysis of the Drag Torque Model of Wet Multi-Plate Friction Clutch with Groove Consideration

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Simulation and Experiment on Dynamic Engagement Characteristics of Wet Clutch

Simulation Research on the Drag Torque of Disengaged Wet Clutches

Study on the groove area effects on the friction-wear properties of a Cu-based wet clutch

Modeling of the Drag Torque of the Disengaged Grooved Wet Clutches with Waviness

Analysis of Clutch Engagement Judder and Its Influence Factors

Analysis of Dynamic Engaged Characteristics of Wet Clutch in Variable Speed Transmission of a Helicopter

Thermal-Fluid-Solid Coupling Simulation and Oil Groove Structure Optimization of Wet Friction Clutch for High-Speed Helicopter

Influence of the steel plate on the friction behavior of automotive wet disk clutches

Simulation and Experimental Study of Engagement Process with Groove Consideration

Investigation of engagement characteristics of a multi-disc wet friction clutch

Nonlinear Dynamic Characteristics of Rub-Impact Process at High Circumferential Velocities in No-Load Multiplate Wet Clutch

Influence upon temperature field distribution with straight grooves parameters of clutch friction disk

Temperature Analysis of Wet Clutch' Friction Pair Considering Axial Pressure Attenuation Effect

Parametric analysis of wear factors of a wet clutch friction material with different groove patterns

Analytical simulation of influential parameters affecting grooved wet clutches performance underdisengagement condition

Study on dynamic characteristics variation mechanism of wet-clutches during the filling phase considering temperature and rotational speed of the oil

Control-oriented modeling of wet clutch friction considering thermal dynamics