Abstract:This paper presents a detailed investigation of the dry clutch engagement process, and vehicle start-up judder phenomenon that could result in the deterioration of vehicle ride comfort. Elasto-plastic friction model is elaborated through the slider-pulley system, which shows some friction characteristics such as presliding, stick-slip motion, Stribeck effects, etc., and applied to dry clutch. The axial compression characteristics of three elastic parts, which include diaphragm spring, cushion spring, and link strip have been taken into consideration, and nonlinear relationship between the release bearing travel and the clutch clamp force is also established. The powertrain system model of front-engine and front-wheel-drive vehicle equipped with manual transmission is set up to recreate the start-up judder phenomenon in the numerical simulation and analyze its mechanism. The sudden transfer of the engine torque during the clutch engagement process results in the initial judder, which can be supposed as the step response of system and is initially weakened due to the damping of the powertrain system. Then the judder gradually strengthens and gets in the most severe vibrance when the clutch is about to get in to the fully engaged state, which is related to the frictional characteristics that forms a closed-loop positive feedback system, as well as the frequent state transitions between sliding state and engaged state. The positive slope of Stribeck effect as well as the reduction of absolute value of negative slope can both effectively suppress the start-up judder, and the apparent judder occurs only if the negative slope is outside of a certain range, instead of in all of the range. In addition, the fluctuation of clutch clamp force can aggravate the start-up judder, in which a more chaotic oscillation is emerged.

Thermo-Mechanical Coupling Characteristics of Dry Clutch Under Different Automotive Starting Modes

Parametric Analysis of the Drag Torque Model of Wet Multi-Plate Friction Clutch with Groove Consideration

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Analysis of Clutch Engagement Judder and Its Influence Factors

Influence of the driving environment on the dynamic characteristics of a DCT vehicle starting considering the longitudinal and vertical coupling model

Simulation and Experiment on Dynamic Engagement Characteristics of Wet Clutch

Influences of the Contact State between Friction Pairs on the Thermodynamic Characteristics of a Multi-Disc Clutch

Dynamic analysis of vehicle start-up judder based on elasto-plastic friction model and dry clutch maneuvering characteristic

Dynamic Characteristics of an Automotive Air-Conditioning Electromagnetic Clutch

Research on the Soft-Starting Characteristics of Wet Clutches in TBM Cutter-Head Driving System.

Tribo-thermal simulation study of AMT dry clutch assembly under the continuous sliding grinding condition

Optimal control of dry clutch engagement based on the driver's starting intentions

Dynamic characteristic analysis for clutch engagement process of series–parallel hybrid electric vehicle

Thermal Behavior of Friction Discs in Dry Clutches Based on a Non-Uniform Pressure Model

A Study on the Start Process Simulation of a Dual Clutch Automatic Transmission Based on Fuzzy Control

Transient temperature characteristics of friction clutch disc considering thermal contact conductance under sliding conditions

Analysis of Dynamic Engaged Characteristics of Wet Clutch in Variable Speed Transmission of a Helicopter

Effects of operating conditions on the tribological behavior of a wet multi-disc clutch during the running-in process

Study on the Engagement Characteristics and Control Strategy of High Speed Difference Dry Friction Clutch

Simulation Research on the Drag Torque of Disengaged Wet Clutches