Abstract:Aiming to obtain a martensite-free microstructure of Ti–Zr alloys with a combination of enhanced deformability and improved mechanical properties for dental application, two high Zr-containing Ti-based alloys were prepared with commercially pure titanium as a control. The effects of Zr addition on the deformation mechanism, microstructure and mechanical properties were investigated. After thermo-mechanical processing and cold deformation, samples were characterized using Vickers microhardness, tensile tests, X-ray diffraction (XRD) scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD and TEM examinations revealed that the increasing Zr addition suppressed the deformation twining and favored the deformation-induced face-centered cubic (FCC) phase, the corresponding reason was discussed. There is a competition between the deformation twin and FCC phase. The two types of FCC phase were simultaneously found with orientation relationships (ORs) of Basal-type: <11–20>HCP//<110>FCC and {0001}HCP//{111}FCC and Prismatic-type: <0001>HCP//<001>FCC and {10-10}HCP//{110}FCC. This phase transformation enhanced the deformability during processing. As the Zr addition increased, the microhardness, mechanical strength and plasticity are increased concurrently. The interactions of twins were found to cause brittle fracture of Ti20Zr alloy. Based on the texture analysis, the activated slip systems of FCC phase were determined via calculating the Schmid factor. The FCC phase not only provided additional slip systems but also impeded dislocation slip effectively, improving the strength-plasticity of Ti30Zr alloy. The findings will provide a novel approach associated with the strengthening-toughening mechanism of metallic materials.

Effect of ZrO2 Addition on Mechanical and Erosive Wear Properties of ZTA Ceramic

Effects of Zr Addition on the Deformation Behavior, Microstructure and Mechanical Properties of Dental Ti Alloys

Effect of ZrO2 addition on properties of Al2O3 ceramics

Improving the Comprehensive Properties of ZrO2–C Materials with Aid of TiO2 Addition

MECHANICAL AND WEAR PROPERTIES OF ZTA CERAMICS

Mechanical and Wear Properties of Al<sub>2</sub>O<sub>3</sub>-15wt%ZrO<sub>2</sub> Composites

Regulating mechanical and anti-erosion wear properties of ZTA ceramics by adjusting Y2O3 content

Effect of Different Abrasive Particle Hardness on Erosion Resistant Performance of ZTA Structure Ceramics

Effects of ZrC content on the microstructure and mechanical property of ZrC/ZTA composites consolidated by hot pressing

Influence of ZrO2 Addition on the Mechanical Properties of Sm2Zr2O7

Mechanical and Wear Properties of Al2o3-15wt%Zro2 Composites

The influence of ZrO2 on the microstructure and mechanical properties of Al2TiO5 flexible ceramics

Effects of Zr Content on the Microstructure and Performance of TiMoNbZrx High-Entropy Alloys

Microstructure and mechanical properties of ZTA fabricated by liquid phase sintering

Study of Effect of Zr Addition on the Microstructures and Mechanical Properties of (ticx–tib2)/cu Composites by Combustion Synthesis and Hot Press Consolidation in the Cu–Ti–B4C–Zr System

Effects of Cr and Zr Addition on Microstructures, Compressive Properties, and Abrasive Wear Behaviors of in Situ TiB2/Cu Cermets

Impact-abrasive wear property of ZrO2 toughened Al2O3 ceramic particles reinforced high manganese steel matrix composites

Effect of TZP nanoparticles synthesized by RCVD on mechanical properties of ZTA composites sintered by SPS

Effect of Zr Addition on the Microstructure and Tribological Property of the Anodization of Ti-6Al-4V Alloy

Effects of Nano-sized ZrO_2 Addition on the Phase and Mechanical Properties of ZrO_2/HA Composite Ceramics

The Effect of Nano-Al2O3 on Sintering Behavior and Mechanical Property of ZrO2 Ceramics