Abstract:Body-centered cubic (BCC) refractory high-entropy alloys (RHEAs) possess the typical advantage of high strength. However, RHEAs often exhibit apparent brittleness at room temperature, which remains great challenges for their engineering applications. In this study, NbMoTaW with 0 and 1 wt% m-ZrO 2 nano-sized ceramic particles RHEAs have been successfully fabricated by ball milling and spark plasma sintering (SPS). The effect of m-ZrO 2 ceramic particles on the microstructures and mechanical properties of NbMoTaW RHEAs was investigated. Results show that the matrix of alloys was characterized by single-phase BCC. Microstructural analysis shows that the grains in the single-phase BCC alloy have been refined by 39.0% through introduction of oxide nano-ceramic particles. The m-ZrO 2 ceramic addition could effectively enhance both the hardness and strength of the NbMoTaW RHEA, accompanied by a slight decrease in plasticity. Compared with the vacuum arc-melting (VAM) method, the sintered NbMoTaW-1ZrO 2 RHEA shows a significant increase in comprehensive compressive properties, especially the ductility. The yield strength, ultimate compressive strength and fracture strain of sintered NbMoTaW-1ZrO 2 RHEA are 1775 MPa, 2118 MPa and 12.4%, respectively, surprisingly increased by 67.8%, 74.9% and 376.9%. A quantitative yield strength model correlating m-ZrO 2 ceramic particle size, volume fraction and NbMoTaW-1ZrO 2 grain size was built. The addition of fine m-ZrO 2 ceramic resulted in Orowan strengthening and fine grains, thereby increasing yield strength of alloy. The superior combination of mechanical properties of the NbMoTaW-1ZrO 2 RHEA could promote it to be a promising alloy in engineering applications.

Effects of ZrO2 ceramics doped with varying content on the mechanical properties and energy release characteristics of W-Zr alloys

Effect of ZrO2 addition on properties of Al2O3 ceramics

Effects of Nb2O5 on the stability of t-ZrO2 and the mechanical properties of ZTM

The Effect of Nano-Al<sub>2</sub>O<sub>3</sub> on Sintering Behavior and Mechanical Property of ZrO<sub>2</sub> Ceramics

Effect of ZrO 2 contents on the mechanical and thermal shock properties of ZrO 2p(3Y)/BN-SiO 2 ceramics composite

The Effect of Nano-Al2O3 on Sintering Behavior and Mechanical Property of ZrO2 Ceramics

Preparation, microstructure and mechanical properties of ZrB2–ZrO2 ceramics

Effects of ZrB2 powders on microstructure and mechanical properties of ZrB2-SiCw ceramics

Enhanced Mechanical Properties, Thermal Shock Resistance and Oxidation Resistance of Si2BC3N Ceramics with Zr-Al Addition

Effects of ZrB2 on Mechanical Properties of Al2O3-ZrB2-SiC Composite Ceramics at Room Temperature

Mechanical properties and strengthening mechanism of the nano-sized m-ZrO 2 ceramic particle reinforced NbMoTaW refractory high-entropy alloy

Mechanical and Wear Properties of Al<sub>2</sub>O<sub>3</sub>-15wt%ZrO<sub>2</sub> Composites

Effect of ZrO2 Addition on Mechanical and Erosive Wear Properties of ZTA Ceramic

Effects of Nb2O5 addition on the sinterability, microstructure and mechanical behaviour of ZTM-A12O3

Effect of Zr2Al4C5 Content on the Mechanical Properties and Oxidation Behavior of ZrB2-SiC-Zr2Al4C5 Ceramics

Effect of AlN and ZrO2 on the Microstructure and Property of the 2Si-B-3c-n Ceramic

Tribological properties and wear resistance mechanism of WC-ZrO2-Al2O3 ceramics

Study of Impact Characteristics of ZrO2 Ceramic Composite Projectiles on Ceramic Composite Armor

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

Dynamic properties of zirconia ceramic bullets under high speed impact

Effects of Residual Stresses on Strength and Crack Resistance in ZrO2 Ceramics with Alumina Coating