Abstract:The mass non-uniformity of hemispherical resonator is one of reasons for frequency split, and frequency split can cause gyroscope to drift. Therefore, it is of great significance to ana-lyze the relationship between mass non-uniformity and frequency split, which can provide a theo-retical basis for mass balance of imperfect resonator. The starting point of error mechanism analysis for gyroscope is the motion equations of resonator. Firstly, based on the Kirchhoff-Love hypothesis in the elastic thin shell theory, the geometric deformation equations of resonator are deduced. Sec-ondly, the deformation energy equation of resonator is derived according to the vibration mode and relationship between the stress and strain of hemispherical thin shell. Thirdly, the kinetic energy equation of resonator is deduced by the Coriolis theorem. Finally, the motion equations of res-onator are established by the Lagrange mechanics principle. The theoretical values of precession factor and natural frequency are calculated by the motion equations, which are substantially con-sistent with the ones by the finite element method and practical measurement, the errors are within a reasonable range. Simultaneously, the varying trend of natural frequency with respect to the geo-metrical and physical parameters of resonator by the motion equations is consistent with that by the finite element analysis. The above conclusions prove the correctness and rationality of motion equations. Similarly, the motion equations of resonator with mass non-uniformity are established by the same modeling method in case of ignoring the input angular rate and damping, and the state equations with respect to the velocity and displacement of vibration system are derived, then twonatural frequencies are solved by the characteristic equation. It is concluded that one of reasons for frequency split is the 4th harmonic of mass non-uniformity, and thus much attention should be paid to minimizing the 4th harmonic of mass non-uniformity in the course of mass balancing for imper-fect resonator.

Balancing method for thin-walled resonator of low cost metallic vibratory gyroscope

Structure Design and Structural Parameter Optimization of Fully Symmetric Vibratory Gyroscope

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

A MICROMECHANICAL MODE-MATCHED GYROSCOPE USING STIFFNESS NONLINEARITY AND ELECTROSTATIC TUNING

Constant-frequency Oscillation Control for Vibratory Micro-Machined Gyroscopes

A Bulk Micromachined Gyroscope With Improved Quality-Factors At Atmospheric Pressure

Research on the Configuration Optimization of All-Metal Micro Resonant Hemisphere

Design, Fabrication, and Characterization of a Multicurved Surface Fusion Metal Resonant Gyroscope

Damping Asymmetry Trimming Based on the Resistance Heat Dissipation for Coriolis Vibratory Gyroscope in Whole-Angle Mode

The High-Precision Balance Method For Hemispherical Resonator Based on Synchronous Trimming System

A Balancing Method for Multi-Disc Flexible Rotors without Trial Weights

Motion Equations of Hemispherical Resonator and Analysis of Frequency Split Caused by Slight Mass Non-Uniformity

Structural Optimization and Excitation Method of Metal-Shell Resonator Gyroscope Driven by Composite Electrodes

Research on Eigenvalue Analysis Method in Multi-Surface Metal Shell Vibratory Gyro

A Novel Mechanical Frequency Tuning Method Based on Mass-Stiffness Decoupling for MEMS Gyroscopes

Dynamic Balancing of a Centrifuge: Application to a Dual-Rotor System with Very Little Speed Difference

Method of Measuring the Static Balance through Weighing the Specific Structure Gyroscope Rotor

Design and optimization of a resonant output frequency gyroscope for robust sensitivity and bandwidth performance

Research on eigenvalue analysis method in metal shell vibratory gyro

A Synchronous Holo-Balancing Method for Flexible Rotors Based on the Modified Initial Phase Vector

Development of an Effective Method to Reduce Mechanical Coupling Error in a Micro Quartz Tuning Fork Gyroscope