Abstract:Titanium dioxide (TiO2) in the form of thin films has attracted enormous attention for photocatalysis. It combines the fundamental properties of TiO2 as a large bandgap semiconductor with the advantage of thin films, making it competitive with TiO2 powders for recycling and maintenance in photocatalytic applications. There are many aspects affecting the photocatalytic performance of thin film structures, such as the nanocrystalline size, surface morphology, and phase composition. However, the quantification of each influencing aspect needs to be better studied and correlated. Here, we prepared a series of TiO2 thin films using a sol-gel process and spin-coated on p-type, (100)-oriented silicon substrates with a native oxide layer. The as-deposited TiO2 thin films were then annealed at different temperatures from 400 °C to 800 °C for 3 h in an ambient atmosphere. This sample synthesis provided systemic parameter variation regarding the aspects mentioned above. To characterize thin films, several techniques were used. Spectroscopic ellipsometry (SE) was employed for the investigation of the film thickness and the optical properties. The results revealed that an increasing annealing temperature reduced the film thickness with an increase in the refractive index. Atomic force microscopy (AFM) was utilized to examine the surface morphology, revealing an increased surface roughness and grain sizes. X-ray diffractometry (XRD) and UV-Raman spectroscopy were used to study the phase composition and crystallite size. The annealing process initially led to the formation of pure anatase, followed by a transformation from anatase to rutile as the annealing temperature increased. An overall enhancement in crystallinity was also observed. The photocatalytic properties of the thin films were tested using the photocatalytic decomposition of acetone gas in a home-built solid (photocatalyst)-gas (reactant) reactor. The composition of the gas mixture in the reaction chamber was monitored using in situ Fourier transform infrared spectroscopy. Finally, all of the structural and spectroscopic characteristics of the TiO2 thin films were quantified and correlated with their photocatalytic properties using a correlation matrix. This provided a good overview of which film properties affect the photocatalytic efficiency the most.

Preparation and Study of Oriented TiO2 Thin Film

Crystallization Behavior and Hydrophilic Performances of V2O5–TiO2 Films Prepared by Sol–gel Dip-Coating

In-Situ Anatase Flake Crystals Prepared By Sol-Gel Method At Low Temperature

Preparation of PZT Thick Film by a High Speed Sol-gel Method

Preparation of TiO2 films under low temperature condition on the glass substrate

The Preparation of TiO_(2-x)N_x(0<x<1) Thin Films by Sol-Gel Method and Its Photocatalysis and Hydrophilic Properties

The Effects of Substrate on the Properties of Sol-Gel Derived TiO2 Films

Fabrication and Optical Property Study of TiO2 Nanocrystalline Films by Sol-gel Methods

Investigation on the Microstructure and Optical Performance of TiO_2 Films by Sol-Gel Method

(0 0 2)-Oriented Growth and Morphologies of ZnO Thin Films Prepared by Sol-Gel Method

Study on Structural, Optical and Hydrophilic Properties of FTO/TiO2 Tandem Thin Film Prepared by Aerosol-Assisted Chemical Vapor Deposition Method

The oriented growth of PbTiO3 thin films deposited by a sol-gel process on substrates without lattice match

The Preparation of TiO2 Film by the Sol-Gel Method and Evaluation of Its Self-Cleaning Property

Photocatalytic Performance of Sol-Gel Prepared TiO2 Thin Films Annealed at Various Temperatures

The Study on the Preparation of Titanium Dioxide Thin Film by Liquid Phase Deposition Method

Preparation and Crystallization Behavior of SiO2-TiO2 Photo-Catalytic Films

Study of hydrophilicity of titanium dioxide thin films prepared by Sol-Gel method

TiO2 film photocatalyst prepared by using sol-gel method with TiCl4 as a precursor

The Preparation and Chemical Structure of Tio2 Film Photocatalyst Supported on Stainless Steel Using the Sol-Gel Method

Orientation Control in Sol–Gel‐Derived BiScO3–PbTiO3 Thin Films

Optimization of the Process for Preparing Al-doped ZnO Thin Films by Sol-Gel Method