Characterization and Photocatalytic Activity of Tio2 Films Loaded on Different Substrates
SZ Chen,PY Zhang,WP Zhu,L Chen
DOI: https://doi.org/10.3321/j.issn:0253-9837.2004.08.011
IF: 16.5
2004-01-01
Chinese Journal of Catalysis
Abstract:The TiO2 films loaded on Ti, At, stainless steel and glass substrates were prepared by the dip-coating method from the Ti(OC4H9)(4) precursor. The surface morphology, chemical composition, crystalline property, photoabsorption capacity and photocatatytic activity of the TiO2 films were characterized by atomic force microscopy (AFM), Auger electron spectroscopy (AES), X-ray diffraction (XRD), diffuse reflectance ultraviolet-visible spectroscopy (UV-Vis) and phtotocatalytic reaction experiments. The TiO2 films loaded on different substrates show different properties and all TiO2 films are of anatase. The mean TiO2 particle size of TiO2/Ti, TiO2/steel, TiO2/Al and TiO2/glass is 15.2, 20.5, 24.1 and 47.7 nm, respectively, and that of TiO2/Ti and TiO2/steel has narrow distribution. Only Ti and 0 were detected on the surface of TiO2/Ti and TiO2/Al, while substrate elements such as Fe, Na, Ca and Si were proved to exist on the surface of TiO2/steel and TiO2/glass. The films have similar absorption capacity in the UV range, and the photocatalytic activity for the benzamide degradation decreases in the order TiO2/Ti > TiO2/Al > TiO2/glass > TiO2/steel. Based on these experimental results, it can be considered that the agglomeration of the precursor films and the transference of substrate elements in the calcination stage cause the difference in properties of the TiO2 films loaded on different substrates.