Abstract:The cure kinetics of naphthyl/dicyclopentadiene epoxy resin and bisphenoxy (3-hydroxy) phosphine oxide was investigated by differential scanning calorimetry (DSC) under nonisothermal and isothermal condition. The advanced isoconversional method was used to study the nonisothermal DSC data, the effective activation energy of the curing system in the early stage agreed with the value Calculated from the Kissinger model and then increased because of the hindrance of molecular mobility. Autocatalytic behavior was shown in the isothermal DSC measurement, which was well described by Kamal model in the early curing stage. In the later stage, a crosslinked network structure was formed and the curing reaction was mainly controlled by diffusion. The diffusion factor was introduced to optimize the Kamal model and correct the deviation of the calculated data. The physical properties of the cured polymer were evaluated by dynamic mechanical thermal analyses, were mogravimetric analyses, and limiting oxygen index test, which exhibited relatively high glass transition temperature, thermal stability, and flame retardancy. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 112: 761-768, 2009

Reaction-induced Phase Separation in Rubber-Modified Epoxy Resin

Polymerization-induced phase separation in polyethersulfone modified epoxy resin systems: effect of curing reaction mechanism

Polymerization-induced viscoelastic phase separation in polyethersulfone-modified epoxy systems.

Rheological Behaviors and Structural Transitions in A Polyethersulfone-Modified Epoxy System During Phase Separation

Phase inversion during bulk copolymerization of N-phenylmaleimide/styrene in presence of polybutadiene (II): Effects of operation conditions and recipes on occurrence of phase inversion and structure of rubber phase

Viscoelastic Effects on the Phase Separation in Thermoplastics-Modified Epoxy Resin

Polymerization Induced Phase Separation in Poly(ether Imide)-Modified Epoxy Resin Cured with Imidazole

Polymerization-Induced Bimodal Phase Separation in A Rubber-Modified Epoxy System

Synthesis and Curing of a Novel Combined Liquid Crystalline Epoxy

Viscoelastic Effects on the Phase Separation in Thermoplastics Modified Cyanate Ester Resin

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Studies on the Phase Separation of a Polyetherimide-Modified Epoxy Resin, 4. Kinetic Effect on the Phase Separation Mechanism of a Blend at Different Cure Rates

Kinetics of Phase Separation at the Early Stage of Spinodal Decomposition in Epoxy Resin Modified with PEI Blends

Rheological Study of Epoxy Systems Blended with Poly(ether sulfone) of Different Molecular Weights

Cure Kinetics of an Epoxy Resin Containing Naphthyl/dicyclopentadiene Moieties and Bis‐phenoxy (3‐hydroxy) Phosphine Oxide System and Properties of Its Cured Polymer

Study on the phase separation of thermoplastic‐modified epoxy systems by time‐resolved small‐angle laser light scattering

Studies on Phase Separation of Polyesterimide-Modified Epoxy Resin. Ii. Effect of Curing Temperature on Phase Separation and Adhesive Property

Studies on the phase separation of polyetherimide-modified epoxy resin, 1. Effect of curing rate on the phase structure

Studies on the Phase Separation of Polyetherimide-Modified Epoxy Resin, 3. Morphology Development of the Blend During Curing

PHASE MORPHOLOGY CONTROL OF POLYSULFONE-MODIFIED EPOXY RESIN

Using Two-Dimensional Time Resolved Light Scattering to Study the Cure Reaction Induced Phase Separation Process of Epoxy-Amine-polyethersulfone Blend with Secondary Phase Separation