Abstract:Relaxor ferroelectrics (RFEs), which possess high maximum polarization (Pmax), low remnant polarization (Pr) and coercive field (Ec), are good candidates for the applications in electrostrictive devices. Compared to lead-free RFEs, lead-containing RFEs possess higher Pmax, due to the contribution by lead ions. However, relatively low breakdown strength (BDS) in lead-containing RFEs becomes a bottleneck for exploring the electrostrictive properties especially at higher electric field. In this work, we synthesized (1−x)[0.5573Pb(Mg1/3Nb2/3)O3-0.4427PbTiO3]-xBa(Zn1/3Nb2/3)O3 [(1−x)PMNT-xBZN, x = 0.1725, 0.1925, 02125 and 0.2325] RFE ceramics with addition of Li2O-B2O3-SiO2 glass additives (2 wt%) and studied the BDS and dielectric/ferroelectric properties in detail. It was found that an enhancement of BDS from ∼120 kV cm−1 for undoped samples to ∼160 kV cm−1 for glass-doped samples. Higher Pmax, lower Pr and lower Ec were simultaneously obtained in x = 0.1725, 0.1925 and 02125 compositions, suggesting improved ferroelectric properties. Purely electrostrictive strains with levels from 0.147% to 0.069% were obtained in glass-doped compositions when x increases from 0.1725 to 0.2325 at 30 °C, and more than 40% strain response were maintained when temperature is increased to 130 °C. This work proves the effectiveness of glass additives to enhance BDS and improve ferroelectric properties in lead-based (1−x)PMNT-xBZN RFE ceramics.

Cofiring Behaviors Between BaTiO3-modified Silver–palladium Electrode and Pb-based Relaxor Ferroelectric Ceramics

Interface Cofiring Behaviour of Multilayer Devices Between Ferroelectric and Ag/Pd Electrode

Interfacial reaction of Ag/Pd metals with Pb-based relaxor ferroelectrics including additives

Relationships between interfacial interaction, electrode formulation and cofiring mismatch of relaxor-based multilayer ceramic devices

Effects of Additives on the Interfacial Microstructure of Cofired Electrode‐Ceramic Multilayer Systems

Structural investigations of the co-fired interface of Pb-based relaxor ferroelectrics and Ag–Pd electrode

Dielectric and relaxor ferroelectric properties of Ba-doped Pb(Zr,Ti)O 3 ceramics

Modified cofiring behaviors between PMN-PNN-PZT piezoelectric ceramics and PZT-doped 70Ag–30Pd alloy metallization

Enhanced Electromechanical Properties of SrTiO3-BiFeO3-BaTiO3 Ceramics Via Relaxor Behavior and Phase Boundary Design

Sintering characteristics and dielectric properties of silver-doped PMN-PZN-PT relaxor ferroelectric ceramics

Effects of BaTiO3 Additive on Densification Mechanism of Silver–palladium Paste

ELECTRIC FIELD INDUCED ANTIFERROELECTRIC TO FERROELECTRIC PHASE TRANSITION OF Pb (zr,sn,ti)o3 CERAMICS AND TAILORING OF PROPERTIES THROUGH COMPOSITION MODIFICATION

TEM and EDS investigation of heterogeneous interfaces in cofired multilayer ceramic capacitors

Co firing behaviors between nickel electrode and BaTiO3 ceramics in MLCC

Microstructures and Dielectric Properties of (na0.5bi0.5)0.775ba0.225ti0.775sn0.225o3 Relaxor Ferroelectric with Bi2O3–B2O3–ZnO Glass Addition

Study of the Structure, Electrical Properties, and Energy Storage Performance of ZnO-modified Ba0.65Sr0.245Bi0.07TiO3 Pb-free Ceramics

Enhanced Breakdown Strength and Improved Ferroelectric Properties in Lead-Containing Relaxor Ferroelectric Ceramics with Addition of Glass

Study on Dielectric-Properties of Pmn-Pzn-Pt Ferroelectric Relaxor Ceramics

Dielectric, impedance, and ferroelectric performances with structural heterogeneity of Sr0.7Bi0.2TiO3 modified lead-free bismuth ferrite-based ceramics

Composition dependence of dielectric properties in Pb(Zn1∕3Nb2∕3)O<sub>3</sub>–PbTiO<sub>3</sub>–BaTiO<sub>3</sub> (PZN–PT–BT) relaxor ferroelectric ceramics

Structure and Electrical Properties of Pb(Ni1/3nb2/3)O-3-Pb(Zr/Ti)O-3 Relaxors