Abstract:The Ba(Ti,Zr)O3‐based multilayer ceramic capacitors (MLCCs) with Ni electrodes, which meet the Electronic Industry Association Y5V standard (from −30° to 85°C, at a temperature capacitance coefficient between −82% and 22%), have been studied in view of the electrode‐ceramic inter‐diffusion by several microstructual techniques (scanning electron microscopy/transmission electron microscopy/high‐resolution transmission electron microscopy (HRTEM)) with an energy‐dispersive X‐ray spectrometer (EDS). The EDS analysis shows that the elements' inter‐diffusion took place along the metal–dielectric interface and the migration of Ni toward the dielectric layers dominated this process. The incorporation of Ni did not transform the crystal structure but introduced lattice distortions, which were characterized by HRTEM, X‐ray diffraction, and EDS. The degree of Ni diffusion in the sample with the thinner dielectric layer was more severe. It was concluded from the results that the Ni diffusion is related to the formation of oxygen vacancies after the annealing process, which should be a noticeable factor in the degradation behavior and reliability of base metal electrode MLCCs. The factors influencing the inter‐diffusion are also discussed.

Co firing behaviors between nickel electrode and BaTiO3 ceramics in MLCC

Co-firing Behavior of ZnTiO3 Dielectric Ceramics/ag Composites for MLCCs

Electrode–Ceramic Inter‐Diffusion of Ba(Ti,Zr)O3‐Based Y5V MLCCs with Ni Electrodes

Effects of BaTiO3 powder particle sizes on dielectric properties of Ni-MLCC ceramics

Cofiring Behaviors Between BaTiO3-modified Silver–palladium Electrode and Pb-based Relaxor Ferroelectric Ceramics

Synthesis and characterization of BaTiO3-coated Ni particles

Effect of BaCu(B2O5) Additives on the Sintering Behavior and Microwave Dielectric Properties of LiNb0.6Ti0.5O3 Ceramics for LTCC Application

Co-Firing Behavior of BaTiO3 and MgCuZn Ferrite Composite Materials

Study on the Interdiffusion in Base-Metal-electrode MLCCs

The Sintering Properties and Interfacial Investigation of Barium Ferrite and Ceramic Cofiring System for the Application of Ltcc Technology

Co-Firing Behavior and Interfacial Structure of BaO–TiO2–B2O3–SiO2Glass–Ceramics/NiCuZn Ferrite Composites

Low temperature sintering and microwave dielectric properties of Ba2Ti3Nb4O18 ceramics for LTCC applications

Study on densification behavior of low-temperature cofiring ceramics

Effects of Additives on the Interfacial Microstructure of Cofired Electrode‐Ceramic Multilayer Systems

Relationships between interfacial interaction, electrode formulation and cofiring mismatch of relaxor-based multilayer ceramic devices

Study On Cofiring Behavior Of Zno-2tio(2)-Nb(2)O(5) Ceramic With B(2)O(3) And Cuo Addition

Low Temperature Cofiring and Compatibility with Silver Electrode of ZnO–SnO2–TiO2–Nb2O5 Ceramics with BaCu(B2O5) Addition

The Sintering and Electrical Properties of La0.5Sr0.5Co0.96Ni0.04O3-δ Ceramics with B2O3- CuO Addition

Low Loss and Good Chemical Compatibility with Silver Electrodes of Cu2+-substituted Ba3Ti4Nb4O21 Ceramics Realizing Low Temperature Co-Fired Ceramics Technology: Crystal Structure, Vibration Modes and Chemical Bonds Studies

Low Temperature Cofiring and Compatibility with Silver Electrode of Li3nbo4 Ceramics with B2o3 Addition

The Co-Fired Behaviors Between Ag and Glass–ceramics Materials in LTCC