Abstract:A modified polymerizable complex (PC) method for the preparation of the relaxor ferroelectric 0.65Pb(Mg1/3Nb2/3)O-3-0.35PbTiO(3) (PMN-PT) ceramics has been developed using a novel water-soluble Nb precursor. The effects of Pb content and sintering temperature on the structure, morphology, composition, and electrical properties of PMN-PT powders and ceramics were investigated systematically. It was found that the modified PC method could effectively reduce the initial crystallization temperature of the perovskite phase to 500 degrees C. For PMN-PT samples with 15% excess Pb content sintered at 600 degrees C for 2 h, the 87% perovskite phase can be achieved, which is much higher than that in conventional solid-state reactions and other solution-based methods at the same temperature. On further increasing the sintering temperature to 1100 degrees C, the perovskite phase content basically remains constant. This is attributed to the Pb-deficient pyrochlore phase formation. On increasing the sintering temperature to 1250 degrees C, the dielectric constant and remnant polarization of PMN-PT ceramics significantly improved due to the larger grain sizes, enhanced density, and the decreasing pyrochlore phase. PMN-PT ceramics with a 98.5% content of the perovskite phase have been fabricated at 1250 degrees C. It displays typical ferroelectric relaxor characteristics with a remnant polarization of 18 mu C/cm(2), a coercive field of 9.6 kV/cm, a piezoelectric coefficient of d(33) = 360 pC/N, and room-temperature and maximum dielectric constants of 3600 and 10 500 at 1 kHz, respectively.

Synthesis and Characterization of Pb(Mg1/3Nb2/3)O3–PbTiO3 Relaxor Ferroelectrics Modified by Ba(Mg1/3Nb2/3)O3

Study of the Structure and Dielectric Relaxation Behavior of Pb(Mg1/3Nb2/3)O3–PbTiO3 Ferroelectric Ceramics

Study of the structure and dielectric relaxation behavior of Pb(Mg 1/3 Nb 2/3 )O 3 –PbTiO 3 ferroelectric ceramics

Study of the structure and dielectric relaxation behavior of Pb(Ni1/3Nb2/3)–PbTiO3 ferroelectric ceramics

Structure and Dielectric Relaxation Behavior Near the MPB for Pb(Mg1/3Nb2/3)O3–Pb(Ni1/3Nb2/3)O3–PbTiO3 Ferroelectric Ceramics

Preparation and Characterization of Relaxor Ferroelectric 0.65pb (Mg1/3nb2/3)o-3-0.35pbtio(3) by A Polymerizable Complex Method

Effect of Pb(Fe1/2Nb1/2)O3 modification on dielectric and piezoelectric properties of Pb(Mg1/3Nb2/3)O3–PbZr0.52Ti0.48O3 ceramics

Phase transition of relaxor ferroelectric Pb(Mg1/3Nb2/3)O-3-PbTiO3 ceramics

Preparation, Structure, and Electric Properties of the Pb(Zn1/3Nb2/3)O3–Pb(Yb1/2Nb1/2)O3–PbTiO3 Ternary Ferroelectric System Ceramics Near the Morphotropic Phase Boundary

Phase diagram of the relaxor ferroelectric (1 - x)Pb(Mg1/3Nb2/3)O-3+xPbTiO(3) revisited

Phase diagram and properties of high TC/TR-T Pb (In 1/2 Nb1/2) O3- Pb(Zn1/3 Nb 2/3) O3-PbTiO3 ferroelectric ceramics

A new Pb(Lu1/2Nb1/2)O3-PbZrO 3-PbTiO3 ternary solid solution with morphotropic region and high Curie temperature

Dielectric Relaxor Evolution and Frequency‐Insensitive Giant Strains in (bi0.5na0.5)tio3‐modified Bi(Mg0.5Ti0.5)O3–PbTiO3 Ferroelectric Ceramics

Structural and electrical properties investigations of Pb(Mg1/3Nb2/3)O3–PbTiO3–Pb(Fe1/2Nb1/2)O3 ceramics

Phase diagram, temperature stability, and electrical properties of (0.85-x) Pb (Mg 1/3 Nb 2/3) O 3-0.10 Pb (Fe 1/2 Nb 1/2) O 3-0.05 PbZrO 3-x PbTiO 3 system

Structure and Dielectric Behavior of Pb(Mg1/3Nb2/3)O3–Pb(Ni1/3Nb2/3)O3–Pb(Zn1/3Nb2/3)O3–PbTiO3 Ferroelectric Ceramics Near the Morphotropic Phase Boundary

Structure and Electrical Properties of Pb(Ni1/3nb2/3)O-3-Pb(Zr/Ti)O-3 Relaxors

Phase evolution and strong temperature‐dependent electrostrictive effect in (1−x)Pb(Mg1/3Nb2/3)O3‐xPbTiO3 solid solutions

Enhanced Relaxor Behavior and Thermal- and Frequency-Insensitive Strain of (na0.5bi0.5)0.93ba0.07ti1 − X(mn1/3nb2/3)xo3 Ceramics

Ferroelectric to Relaxor Transition in BaTiO3-Bi(Zn2/3Nb1/3)O-3 Ceramics