Abstract:We studied the growth of carbon nanotubes(CNTs) over a Co/Mo/Al_2O_3 catalyst by decomposing ethylene with or without the assistance of water.The optimal amount of water was determined to be 0.6%(φ) since excess water removed the amorphous carbon around the catalysts and also directly etched the CNTs at high temperature.Under this condition,the yield of CNTs can be increased from 3.7 g·g~(-1),based on the mass of catalyst,to 70 g·g~(-1) within 1 h.The time-dependent online conversion of ethylene and the ratio of effective catalysts suggested that the effect of water is insignificant in the final growth period of the CNTs compared to that at the beginning.The correlation between the relative activity of the catalyst and the relative density of the CNT agglomerate suggests that the lack of growth volume inside the CNT agglomerate results in a gradual deactivation of the catalyst in the final CNT growth period. Raman characterization suggests that the degree of CNT defects increases with the bulk density of the CNT agglomerates since the mechanical resistance that is exposed on CNTs inside the agglomerate increases with reaction time.Thermal-gravimetric analysis indicates that the purity of CNTs ranges from 95.0%to 99.9%for a product with average purity of 99.2%.The non-uniform purity of the CNTs is due to the difference in mechanical resistance inside and outside the CNT agglomerate.The growth of CNTs outside the agglomerate is nearly free of mechanical resistance compared to that inside the agglomerate and,consequently,results in a high yield and high purity for the CNTs.These results suggest that it is necessary to control the agglomerate size and the structure,and to use a reactor with a large reactor volume for the growth of CNTs with low resistance and with high yield.

Effect of Co2 and H2o on the Synthesis of Single-Walled Cnts

Effect And Mechanism Of Water On Carbon Nanotubes Growth

Catalyst Design Using Nanoporous Iron for the Chemical Vapor Deposition Synthesis of Single-Walled Carbon Nanotubes

Effect of Hydrogen on the Synthesis of Carbon Nanofibers by CO Disproportionation on Ultrafine Fe3O4

Carbon Dioxide Promotes Dehydrogenation in the Equimolar C2 H2 -CO2 Reaction to Synthesize Carbon Nanotubes.

Combination effect of growth enhancers and carbon sources on synthesis of single-walled carbon nanotubes from solid carbon growth seeds

A New Understanding of Carbon Nanotube Growth: Activation and Deactivation of a Catalyst

CO<sub>2</sub>-Assisted SWNT Growth on Porous Catalysts

Effects of hydrogen on the formation of aligned carbon nanotubes by chemical vapor deposition

Effect of metal oxide and oxygen on the growth of single-walled carbon nanotubes by electric arc discharge

Effects Of The Supporting Method Of The Active Constituent Of Catalyst On The Syntheses Of Carbon Nanotube Using Cvd Method

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Effect of adding W to Fe catalyst on the synthesis of SWCNTs by arc discharge

Catalytic Mechanism of Co-containing Layered Double Hydroxide (Co-LDH) as a Precursor in Carbon Nanotube (CNT) Synthesis

Water-Assisted Growth of Carbon Nanotubes over Co/Mo/Al_2O_3 Catalyst

Co/carbon-nanotube monometallic system: the effects of oxidation by nitric acid

In Situ TEM Observation of the Gasification and Growth of Carbon Nanotubes Using Iron Catalysts

Controllable growth of double wall carbon nanotubes in a floating catalytic system

Low-temperature synthesis of multi-walled carbon nanotubes over Cu catalyst

Carbon monoxide-assisted growth of carbon nanotubes

Carbon-Involved Near-Surface Evolution of Cobalt Nanocatalysts: an in Situ Study