Abstract:In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as temperature, choice of catalyst, etc on the growth behavior of nanotubes has been examined to understand the catalytic growth of CNTs. The transition metal catalysts, Fe and Ni, were used in both elemental metal form and in a metal complex form. In the case of elemental metal catalysts, the respective metals were deposited over the Si substrate using thermal evaporation following which nanotubes were synthesized by means of CVD. Subsequent studies of the synthesized carbon nanostructures employing elemental metal catalysts revealed a significant influence of the temperature and the catalyst material on the structure of CNTs. The CNTs synthesized using Ni catalyst were bamboo-like whereas the CNTs developed employing Fe catalyst were straight tubes with partial metal filling. Consequently, growth models for the different growth mechanisms have been proposed. Certain limitations of the above process have been overcome by employing spin-coating of a metal complex catalyst material on the Si substrate. The CVD synthesis of nanotubes using metal complex catalysts always resulted in partially catalyst filled CNTs. More importantly, the metal complex catalyst could be easily patterned on the Si substrate using spin-coating and photolithography, which resulted in site selective growth of partially catalyst filled MWCNTs. Since the entire process of site selective growth is suitable for conventional device fabrication, this method is a promising and practical pathway for large-scale fabrication of several magnetic material filled CNT-based devices.

Carbon monoxide-assisted growth of carbon nanotubes

Selective growth of semiconducting single-walled carbon nanotubes solely from carbon monoxide

Study of Controlled Growth of Carbon Nanotubes in Microstructures at Low Temperature

TEM Investigation on the Growth Mechanism of Carbon Nanotubes Synthesized by Hot-Filament Chemical Vapor Deposition.

Growth and Characterization of Bamboo-Like Multiwalled Carbon Nanotubes over Cu/Al2o3 Catalyst

Study on the Definite Direction Growth of Carbon Nanotubes by the Microwave Plasma-Enhanced Chemical Vapro Phase Deposition

The Role of Hydroxyl and Atomic Oxygen in Multiwall Carbon Nanotube Growth

Preparation of monodispersed multi-walled carbon nanotubes in chemical vapor deposition

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Fabrication and Growth Mechanism of Carbon Nanotubes by Chemical Vapor Deposition

The growth of multi-walled carbon nanotubes with different morphologies on carbon fibers

Methanol-mediated growth of carbon nanotubes

A Supercritical‐Fluid Method for Growing Carbon Nanotubes

Fabrication and growth mechanism of Ni-filled carbon nanotubes by the catalytic method

Growth and Characterization of Multi-Walled Carbon Nanotubes using Chemical Vapor Deposition

In situ growth of CNTs on carbon fiber by chemical vapor deposition

Synthesis and growth of multi-walled carbon nanotubes (MWNTs) by CCVD using Fe-supported zeolite templates

Carbon Nanotubes Synthesized by Simple Thermal Chemical Vapor Deposition and Their Electrical Properties

High-rate Low-Temperature Growth of Vertically Aligned Carbon Nanotubes

Synthesis of multi-walled carbon nanotubes by thermal CVD technique on Pt–W–MgO catalyst

Cobalt Ultrathin Film Catalyzed Ethanol Chemical Vapor Deposition Of Single-Walled Carbon Nanotubes