Abstract:Due to the increasing cost of Au, the semiconductor industry has gone through a dramatic shift away from Au wire bonding to Cu wire bonding. Pd-coated Cu (PdCu) wire has become the favored wire choice over bare Cu wire for fine pitch applications. The advantages of PdCu wire include better HAST reliability results and a more stable stitch bond process window. This paper will examine the critical aspect of bringing Cu and PdCu wire technology from chip design to wire bonding process development to qualification, reliability test and final production. Chip design needs to take into consideration the requirement of Cu wire bonding. Compared to Au wire bonding, Cu wire bonding has many more challenges including pad material push out (pad splash), Al layer peel off (pad peel) and crack in the barrier and dielectric layer (pad crack). This paper considers the impact of various pad structures & metallization to PdCu wire assembly quality and reliability. Because of the unique challenges facing Cu wire bonding processes, wire bonding process development becomes one of the bottlenecks in the assembly process. To shorten the development cycle and ease the requirement for extensive Design Of Experiments (DOEs), a new model based approach was developed and implemented on the latest Cu wire bonder. With this approach, the bonding parameters are calculated based on numerical models. It reduces the need for parameter optimization. This paper will also discuss how modifications and newly developed metrology tools are used in the optimization of PdCu wire. Because of the narrow process window in Cu and PdCu wire bonding, achieving reliable production and high yields requires the process to have a sustainable process window and be portable and transferable to multiple machines and be robust across material variations commonly encountered in a production environment. This paper examines the methods used in quantifying process windows and portability of the wire bonding equipment to ensure high reliability for the end product. Development and optimization of PdCu wire bonding requires a fundamental understanding of interfacial reaction in bonds during both bonding and reliability tests, as proper formation of intermetallic compounds is beneficial to bonding strength. While the knowledge of intermetallic growth in bare copper wire bonds on aluminum has become well established in the past five years, there is little literature in terms of the morphology and growth of intermetallic phase between PdCu wire and Al pad. This paper ascertains the intermetallic growth and phase transformation, retention of aluminum oxide, and behavior of palladium in PdCu wire bonds using high resolution transmission electron microscopy (HRTEM) of dual beam focused ion beam (FIB) thinned specimens.

Failure Analysis of Debonding of Gold on Electrolytic Nickel and Gold

Failure Analysis on Electrolytic Ni/Au Surface Finish of Pcb Used for Wire Bonding and Soldering

Failure Analysis of Un-Wetting for the Surface Finish on the ENIG

Failure Analysis for Gold Wire Bonding of Sensor Packaging Based on Experimental and Numerical Methods

Research on Discoloration Problem of Electrolytic Ni/Au on High Density Package Substrate

Au Plating Failure Prevention on the Electronic Industry

Study the etching mechanism of photosensitive dry film on depositing gold during fabrication of printed circuit board

Technical Barriers and Development of Cu Wirebonding in Nanoelectronics Device Packaging

Solderability Of Flash Gold Surface Finish

Pd-coated Cu wire bonding technology: Chip design, process optimization, production qualification and reliability test for high reliability semiconductor devices

Comprehensive Study of Various Au-Au Wire Bonding Failure

Undissolved gold in fine-pitch BGA solder joint under thermal cycling test

Failure investigation on copper-plated blind vias in PCB

The effect of finish layer on the interfacial cracking failure of Au Si bonding

Characteristic morphologies that cause failure of Au80Sn20/AlN substrate solder joint under combined temperature cycle and current switch cycle tests

Pcb Related Failures in Electronic Assemblies

Effect of Ni(P) Layer Thickness on Interface Reaction and Reliability of Ultrathin ENEPIG Surface Finish

Influences of surface oxide films of aluminum bondpads on gold wire bonding

Improvement of the Solderability of Aluminum Alloy, Nickel, Stainless Steel and Copper by Metallization of Silver and Nickel for Power Semiconductors

Mechanical Issues of Cu-to-Cu Wire Bonding

Low-Temperature Ultrasonic Bonding of Cu/Sn Microbumps with Au Layer for High Density Interconnection Applications