Abstract:Polycarbosilane (PCS) serves as a crucial precursor for silicon carbide (SiC) fibers and ceramics. However, both of the precursor and the resulting SiC ceramics are carbon-rich, which is often viewed as detrimental to their relevant high-temperature properties. In this work, PCS is modified using nanosized Si particles to improve SiC grain growth and reduce carbon content in the resulting SiC ceramics, and the structural evolution during the polymer–ceramic conversion process has been meticulously investigated. The findings reveal that the incorporation of nano-Si into PCS raises its actual ceramic yield and accelerates the organic-inorganic conversion process. This is attributed to the formation of a more crosslinked structure at 200 °C–350 °C, resulting from the reaction between the Si–OH groups in nanosized Si and the Si–H and Si–CH3 groups in PCS. The carbothermic reaction between nano-Si and the free carbon starts at approximately 1200 °C at the periphery of nanosized Si particles, and is accomplished at around 1400 °C. This leads to the formation of large-sized reactive β-SiC. Simultaneously, PCS-derived β-SiC with smaller sizes is also formed at 1300 °C–1400 °C. At 1600 °C–1800 °C, the growth of the reactive and the derived β-SiC in nano-Si-modified PCS is both accelerated due to a substantial decrease in the free carbon content. Consequently, the grain size of β-SiC is much larger than that of unmodified PCS. Additionally, the residual amorphous free carbon transforms into nanocrystalline carbon at around 1400 °C and evolves into graphite carbon at 1600 °C–1800 °C, which exhibits a more ordered structure with larger size compared to that in unmodified PCS.

Synthesis and Characterization of Continuous Freestanding Silicon Carbide Films with Polycarbosilane (PCS)

Synthesis of cyano-polycarbosilane and investigation of its pyrolysis process

Effect of polycarbosilane content on microstructures and mechanical properties of short-carbon-fibre-reinforced SiC composites

Additive manufacturing of high mechanical strength continuous Cf/SiC composites using a 3D extrusion technique and polycarbosilane‐coated carbon fibers

Growth of Poly-Crystalline Si Films on Flexible Substrate by Hot Wire Chemical Vapor Deposition

Improving SiC grain growth and reducing carbon content in pyrolyzed polycarbosilane using nanosized Si particles

Processing Continuous Submicro/Nano SiC Fibers by Electrospinning

Emulsion-Blow Spun Self-Sustained Crystalline β-Silicon Carbide (SiC) Fiber Mat and Its Conductivity Property

Preparation of SiC ceramic fiber from a photosensitive polycarbosilane

Blue-green luminescence and SERS study of carbon-rich hydrogenated amorphous silicon carbide films with multiphase structure

Fabrication of Silicon Carbide (sic) Coatings from Pyrolysis of Polycarbosilane/Aluminum

Synthesis and Spinnability of Vinyl-Grafted Carbon Nanotubes /polycarbosilane Precursor with High Ceramic Yield

Fabrication of SiC ultrafine fiber with low oxygen content by electrospinning, thermal curing and pyrolysis of cyano-polycarbosilane

Tailoring of Porous Structure in Macro-Meso-Microporous SiC Ultrathin Fibers via Electrospinning Combined with Polymer-Derived Ceramics Route

Microstructure and Properties of Polycarbosilane Transferred Nano Sic Reinforced B4c Matrix Composites

Synthesis and investigation of the physicochemical properties of polymorphic 3C–SiC

Fabrication of Sic Fibres from Yttrium-Containing Polycarbosilane

Synthesis of Polytitanocarbosilane and Preparation of Si–C–Ti–B Fibers

Synthesis of Crystalline Sic Nanofiber Through the Pyrolysis of Polycarbomethylsilane Coated Platelet Carbon Nanofiber

Synthesis of silicon carbide in a matrix of graphite-like carbon prepared via carbonization of rigid-rod polyimide langmuir-blodgett films on silicon substrate

Influence of polycarbosilane composition on the properties of SiC/SiC composite fabricated by precursor infiltration and pyrolysis process