Abstract:Polycarbosilane (PCS) serves as a crucial precursor for silicon carbide (SiC) fibers and ceramics. However, both of the precursor and the resulting SiC ceramics are carbon-rich, which is often viewed as detrimental to their relevant high-temperature properties. In this work, PCS is modified using nanosized Si particles to improve SiC grain growth and reduce carbon content in the resulting SiC ceramics, and the structural evolution during the polymer–ceramic conversion process has been meticulously investigated. The findings reveal that the incorporation of nano-Si into PCS raises its actual ceramic yield and accelerates the organic-inorganic conversion process. This is attributed to the formation of a more crosslinked structure at 200 °C–350 °C, resulting from the reaction between the Si–OH groups in nanosized Si and the Si–H and Si–CH3 groups in PCS. The carbothermic reaction between nano-Si and the free carbon starts at approximately 1200 °C at the periphery of nanosized Si particles, and is accomplished at around 1400 °C. This leads to the formation of large-sized reactive β-SiC. Simultaneously, PCS-derived β-SiC with smaller sizes is also formed at 1300 °C–1400 °C. At 1600 °C–1800 °C, the growth of the reactive and the derived β-SiC in nano-Si-modified PCS is both accelerated due to a substantial decrease in the free carbon content. Consequently, the grain size of β-SiC is much larger than that of unmodified PCS. Additionally, the residual amorphous free carbon transforms into nanocrystalline carbon at around 1400 °C and evolves into graphite carbon at 1600 °C–1800 °C, which exhibits a more ordered structure with larger size compared to that in unmodified PCS.

Fabrication of Silicon Carbide (sic) Coatings from Pyrolysis of Polycarbosilane/Aluminum

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

In-Situ Generation of Sic Coating by Polycarbosilane Pyrolysis

Novel Chemical Method to Fabricate SiC/Al_2O_3 Ceramic Composite Coatings on Metallic Substrates

Siliconization elimination for SiC coated C/C composites by a pyrolytic carbon coating and the consequent improvement of the mechanical property and oxidation resistances

Improving SiC grain growth and reducing carbon content in pyrolyzed polycarbosilane using nanosized Si particles

Effect of polycarbosilane content on microstructures and mechanical properties of short-carbon-fibre-reinforced SiC composites

Structure of Sic Coatings from Polycarbosilane on Graphite for Fuel Element Matrix of High Temperature Gas-Cooled Reactor

Fabrication and characterization of pyrolytic carbons from phenolic resin reinforced by SiC nanowires with chain-bead structures

Fabrication, Microstructure, and Properties of SiC/Al 4 SiC 4 Multiphase Ceramics Via an In-Situ Formed Liquid Phase Sintering

Processing of Silicon Carbide Ceramics Using Chemically Modified Polycarbosilanes

Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering

Synthesis of cyano-polycarbosilane and investigation of its pyrolysis process

Fabrication of Sic Fibres from Yttrium-Containing Polycarbosilane

Microstructure and Properties of Polycarbosilane Transferred Nano Sic Reinforced B4c Matrix Composites

Synthesis of Crystalline Sic Nanofiber Through the Pyrolysis of Polycarbomethylsilane Coated Platelet Carbon Nanofiber

SiAlC ceramics from a new polyaluminocarbosilane: Synthesis, structure and oxidation behaviors

Polycarbosilane as a modulator for reaction-bonded silicon carbide processing of GNPs/Si mixtures

Microstructural and Tribological Properties of Cold Sprayed High Content Sicp/Al Coating by Sicp Mild-Oxidation Treatment

Influence of polycarbosilane composition on the properties of SiC/SiC composite fabricated by precursor infiltration and pyrolysis process

Fabrication of (SiC-AlN)/ZrB2 Composite with Nano-Micron Hybrid Microstructure via PCS-Derived Ceramics Route