Abstract:Die-less spinning is an advance incremental forming process widely used for the manufacturing of thin-walled shell components. During the spinning, workpiece shape and forming state both change continuously, and the influence of process parameters on the forming results is also time-varying, which make it difficult to control the forming quality. To this end, this work develops a real-time measurement system and an online pre-perception method to provide technical support for dynamic control of the spinning process. Specifically, the real-time measurement system is constructed firstly by placing two laser profilers bilaterally at two sides of the workpiece. Based on the measuring data of two laser profilers, the profile data of workpiece cross-section is obtained by coordinate transformation, data denoising and correcting the error caused by inclined workpiece surface. Then, an algorithm is proposed to identify the critical geometric parameters (flange width, roller action radius, wall thickness and flange fluctuation degree) of workpiece shape from the profile data. In contrast to the measurement results by a three-coordinate measuring machine, the developed system presents a real-time measurement error less than 4%. Moreover, an online pre-perception method of wall thickness and wrinkling defect is developed based on the real-time measured workpiece shape parameters. The online pre-perception of wall thickness and wrinkling defect presents high accuracy with the relative error less than 2.1%. The above results indicate both the workpiece dimensions and spinning state can be well real-time measured and online pre-perceived, which can provide important foundation for the study of time-varying influence and dynamic control of the spinning process.

Fast online acquisition and analysis for parison swell and sag in blow molding

Online Analysis of Parison Dimension in the Extrusion Blow Molding of Plastics

On-line measurement technology of parison wall thickness for extrusion blow molding

Numerical Prediction and Experimental Validation of Viscoelastic Annular Swell

Study on Design and Optimization Techniques of Parison Thickness for Extrusion Blow Molding

Numerical simulation and experimental investigation on parison formation from a varying die gap in extrusion blow molding

Growth Profiles of Parison Free Inflation in Plastics Extrusion Blow Molding

STUDY ON PARISON SWELL OF MODIFIED PVA IN EXTRUSION BLOW MOLDING

HDPE/PA6 blends: parison formation behaviour in extrusion blow molding

Swell and Sag Behavior in Annular Parison Extrusion of Polyethylene/ Polypropylene Blends

The polymer melt swelling behavior in micro-extrusion process for preparation of continuous carbon fiber reinforced PP prepreg filament

Online Pre-Perception of Forming State Based on Real-Time Measurement in Spinning of Thin-Walled Shell Component

3D Numerical Simulation of Parison Inflation in Extrusion Blow Molding

Visualization and Simulation of Filling Process of Simultaneous Co-Injection Molding Based on Level Set Method

Optimizing Parison Thickness for Extrusion Blow Molding by Hybrid Method

Detecting blend morphology development during melt blending along an extruder

Visualization Study and Analysis on Preform Growth in Polyethylene Terephthalate Stretch Blow Molding

Study on extrudate swell of polypropylene in double-lumen micro profile extrusion

A Study on the Distinguishing Responses of Shrinkage and Warpage to Processing Conditions in Injection Molding

Finite Element and Neural Network Modeling of Viscoelastic Annular Extrusion

CAD/CAE Technique of Parison Inflation in Extrusion Blow Molding