Abstract:This research investigates the control of thickness and weight in plastic extrusion vacuum-thermoforming products to identify optimal key parameters for cost reduction and energy savings. The initial step involves identifying crucial influencing factors. In this step, the Delphi technique was employed through a questionnaire administered to a panel of expert scholars to ensure minimal error and maximal reliability in determining key influencing factors. Consensus was sought to establish appropriateness and consistency. Subsequently, the Taguchi method was applied for quality design and planning of the extrusion vacuum-forming process. The experimental design parameters were selected using an L18 (21 × 37) orthogonal array, and the desired quality characteristics were determined. Comparative analysis of quantitative production data from two consecutive experiments was conducted, and based on F-values and contribution analysis, the combination of control factors maximizing the Signal-to-Noise (S/N) ratio was identified. The objective is to seek optimal parameters for improving the quality of the plastic polypropylene (PP cup lid) manufacturing process, reducing process variability, and identifying the most robust production conditions. Through multiple actual production prediction experiments, it was determined that five control factors, "polypropylene new material ratio," "T-die lips adjustment thickness", "mirror wheel temperature stability", "molding vacuum pressure time", and "forming mold area design", contribute to the maximization of the S/N ratio, i.e., minimizing variability. Statistical validation confirms a significant improvement in product quality and weight control. Noteworthily, the quality control model and experimental design parameters established in this study are also applicable to other plastic products and bio-based materials, such as PET, HIPS, and biodegradable PLA lids with added calcium carbonate. The results of the experimental production demonstrate its ability to consistently control product weight within the range of 3.4 ± 0.1 g, approaching the specified tolerance limits. This capability results in approximately 2.6% cost savings in product weight, contributing significantly to achieving a company's KPI goals for environmental conservation, energy efficiency, and operational cost reduction. Therefore, the findings of this study represent a substantial and tangible contribution.

Study on Design and Optimization Techniques of Parison Thickness for Extrusion Blow Molding

Build Orientation Optimization for Extrusion-Based Additive Manufacturing Coupling with Adaptive Slicing

Sequential Optimization Design Research on Rear Mould Board of Injection Machine

Simulation and Experimental Analysis on Non-circular Cross-section Parts Residual Wall Thickness of Water-assisted Injection Molding

Effect on Residual Wall Thickness of Parts with Floating Core Injection of Water-Assisted Injection Molding

Applying the Taguchi Method to Improve Key Parameters of Extrusion Vacuum-Forming Quality

Design Optimization of Molds for Autoclave Process of Composite Manufacturing

Optimization of Control Parameters in Micro Hot Embossing

Optimization of the Compression (Injection/Compression) Molding Process Using Numerical Simulation

Numerical Study of Thickness Distribution of Stretch-Blow Bottles for Defects Prediction

Improved Optimization of a Coextrusion Die with a Complex Geometry Using the Coupling Inverse Design Method

Topological and Parameter Optimization Design on Front Platen of Injection Molding Machine

Research on Optimization of the Hot Embossing Process

Optimized Design Method for Profile Extrusion Die Based on NURBS Modeling

A method combining optimization algorithm and inverse-deformation design for improving the injection quality of box-shaped parts

Study of Residual Wall Thickness and Multiobjective Optimization for Process Parameters of Water-Assisted Injection Molding

Multi-Objective Optimization of a Multi-Cavity, Significant Wall Thickness Difference Extrusion Profile Mold Design for New Energy Vehicles

Numerical Simulation and Process Optimization of a 3D Thin-Walled Polymeric Part Using Injection Compression Molding

Research on Lightweight Injection Molding (CAE) and Numerical Simulation Calculate of New Energy Vehicle

Design and Parametric Optimization of the Injection Molding Process Using Statistical Analysis and Numerical Simulation

Analysis of the main factors affecting mass production in the plastic molding process by using the finite element method