Abstract:Ethylene-propylene-diene monomer (EPDM) is a key engineering material; its mechanical characterization is important for the safe use of the material. In this paper, the coupled effects of thermal degradation temperature and time on the tensile mechanical behavior of EPDM rubber were investigated. The tensile stress-strain curves of the aged and unaged EPDM rubber show strong nonlinearity, demonstrating especially rapid stiffening as the strain increases under small deformation. The popular Mooney–Rivlin and Ogden (N = 3) models were chosen to fit the test data, and the results indicate that neither of the classical models can accurately describe the tensile mechanical behavior of this rubber. Six hyperelastic constitutive models, which are excellent for rubber with highly nonlinearity, were employed, and their abilities to reproduce the stress-strain curve of the unaged EPDM were assessed. Finally, the Davis–De–Thomas model was found to be an appropriate hyperelastic model for EPDM rubber. A Dakin-type kinetic relationship was employed to describe the relationships between the model parameters and aging temperature and time, and, combined with the Arrhenius law, a thermal aging constitutive model for EPDM rubber was established. The ability of the proposed model was checked by independent testing data. In the moderate strain range of 200%, the errors remained below 10%. The maximum errors of the prediction results at 85 °C for 4 days and 100 °C for 2 and 4 days were computed to be 17.06%, 17.51% and 19.77%, respectively. This work develops a theoretical approach to predicting the mechanical behavior of rubber material that has suffered thermal aging; this approach is helpful in determining the safe long-term use of the material.

Simulation of Mechanical Behaviour of Vulcanized EPDM/PA Blends

Mechanical Behaviors of Copolymer Elastomers: Experimental Characterization and Constitutive Modelling

A Molecular Study on the Reinforcement of Polymethylene Elastomers

The Rheological Behavior of Epoxy Resin and PA11 Blends

Viscoelastic Bilinear Cohesive Model and Parameter Identification for Failure Analysis of Adhesive Composite Joints

Mooney-Rivlin Parameter Determination Model as a Function of Temperature in Vulcanized Rubber Based on Molecular Dynamics Simulations

Effect of Vulcanization on the Tribological Behavior and Sealing Performance of EPDM Seals: Experimentation and Simulation

Comparison Among Three Different Approaches to Dynamic Damage Measurement for Polymer Blends

Study on Mechanical Properties of Vulcanized Natural Rubber with Filler

Novel Model for Uniaxial Strain‐rate–dependent Stress–strain Behavior of Ethylene–propylene–diene Monomer Rubber in Compression or Tension

Molecular simulation guided constitutive modeling of filled rubber: Bridging structural parameters to constitutive equations

Phenomenological Modeling of the Stress-Stretch Behavior of EPDM Rubber with Loading-rate and Damage Effects

Evaluation of Crosslink Density Using Material Constants of Ethylene-Propylene-Diene Monomer/Styrene-Butadiene Rubber with Different Nanoclay Loading: Finite Element Analysis-Simulation and Experimental

NUMERICAL IMPLEMENTATION OF THE TSCHOEGL–CHANG–BLOCH NONLINEAR VISCOELASTIC CONSTITUTIVE LAW FOR UNVULCANIZED CARBON BLACK–FILLED RUBBERS

A MD Simulation and Experimental Study

Nonlinear viscoelastic behavior and their time-temperature superposition for filled styrene butadiene rubber compounds and vulcanizates

A rate-dependent aging constitutive model of EPDM rubber

Modeling and simulation for the swelling behavior of unvulcanized rubber during the calendering process

Constitutive Model for Thermal-Oxygen-Aged EPDM Rubber Based on the Arrhenius Law

Study on the Structure and Properties of PA6/POE-g-MAH Blends

Application of Two Phase Model to Linear Viscoelasticity of Reinforced Rubbers