Abstract:The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt-mixing through a twin-screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of epsilon-caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic for-in, and crystallization and melting behaviors using polarized optical microscopy (POM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT-IR) and C-13 solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt-mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T,) for the in situ blends, contrary to an increase of T, with increasing PA66 content for the melt-mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. (c) 2007 Wiley Periodicals, Inc.

Study on the Structure and Properties of PA6/POE-g-MAH Blends

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Microstructures and Mechanical Properties of Polypropylene/polyamide 6/Polyethelene-Octene Elastomer Blends

Study on the Microstructures and Mechanical Behaviour of Compatibilized Polypropylene/Polyamide-6 Blends

Research on effect of ABS,MAH,DCP on property of PA6/ABS blend

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Dynamic Fracture Properties of PP/PA6/POE-g-MA Studied by Caustics Method

The influence of extrusion process on micromorphology of PA 6/POE/POE-g-MA ternary blends: A quantitative analysis

PA6／POE-g-MAH体系的结构与性能研究

STUDY ON TOUGHENING OF PA6/POE-g-MAH/NANO BaSO_4 BLENDS

In Situ Formation of the Core–Shell Particles and Their Function in Toughening PA6/SEBS-g-MA/PP Blends

Toughening of PA6 with MAH Functionalized Acrylate-styrene-acrylonitrile Copolymer

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Enhanced compatibility of PA6/POE blends by POE-g-MAH prepared through ultrasound-assisted extrusion

MORPHOLOGICAL EVOLUTION AND VISCOELASTIC BEHAVIOR OF COMPATIBILIZED HDPE/PA6 BLENDS

IMPROVEMENT OF TOUGHENING AND MECHANICAL PROPERTIES EQUILIBRIUM FOR PA6/VERSIFY BLENDS BY VERSIFY-g-(MAH-co-St)

Effect of Maleic Anhydride Copolymerization Mode on the Properties of PA6/ABS Blends

THE STUDY OF APPLIED BEHAVIOR OF PP/PA6 BY USING GRAFTED POLYPROPYLENE AS COMPATILIZER

Melt Rheological and Thermoresponsive Shape Memory Properties of HDPE/PA6/POE-g-MAH Blends

Influence of Preparation Methods on Structure and Properties of PA6/PA66 Blends: A Comparison of Melt‐mixing and in Situ Blending

Reactive Compatibilization of Polyamide 6/Olefin Block Copolymer Blends: Phase Morphology, Rheological Behavior, Thermal Behavior, and Mechanical Properties